PMCC Flash Point Tester LCFP-A10

Name: PMCC Flash Point Tester LCFP-A10
Brand: Labtron.best
SKU: LCFP-A10
Rating: 4.9 (846 reviews)

LCFP-A10 is compact, stand-alone closed cup flash point tester which determines the low temperature operability in diesel fuel, biodiesel, blends and gas oils. It is designed as per “Test Methods for Flash Point of Petroleum Products (Pensky-Martens Closed Cup Methods)” ASTM D93.

Name

Product

Message

Captcha

Refersh

Ambient temperature	≤ 35 °C
Relative humidity	≤ 85 %
Ignition Mode
Temperature range	5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C
Aperture of ignition device	0.8 mm
Standard oil cup-Inner diameter	50.7 ~ 50.8 mm
Standard oil cup- Depth	55.7 ~ 56.0 mm
Standard oil cup- Depth of Marked line on the oil cup	33.9 ~ 34.3 mm
Standard oil cup-Oil sample cubage	About 70 ml
Stirring speed	90 ~ 120 rpm for procedure A; 250 ± 10 rpm for procedure B
Stirring blade	8 × 40 mm
Sample temperature rising rate	1 ~ 12 °C per minute
Measurement Range
Flash Point
Resolution
Repeatability
Reproducibility
Accuracy
Precision
Gas Flame
Heating power	0 ~ 600 W
Dimension	420 × 350 × 350 mm
Total Power Consumption	600 W
Power supply	AC 220 V ± 10 %, 50 Hz
Net Weight

- Ignition source : Coal gas
- Rod type Mercury Thermometer
- Variable Temperature Range
- 45TYZ Stirring Motor
It is suitable to determine closed cup flash point of petroleum products having a flash point higher than 40 °C
PMCC Flash Point Tester LCFP-A10

Related Products of Closed Cup Flash Point Tester

Automatic PMCC Flash Point Tester LCFP-A11

10 °C ~ 40 °CAmbient temperature
≤ 80 %Relative humidity
Ambient Temperature ~ 250 °CMeasurement Range
Lower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °CFlash Point

Automatic PMCC Flash Point Tester LCFP-A13

10 °C ~ 40 ℃Ambient temperature
≤ 80 %Relative humidity
electron igniter / gas flameIgnition Mode
Room Temperature ~ 300 ℃Temperature range

Automatic Thermogravimetric Analyzer

Automatic Thermogravimetric Analyzer LTGA-A10

Room temperature to 1000 ºC Temperature range
0.1 ºCTemperature resolution
±0.1 ºCTemperature fluctuation
1 ~ 80 ºC / minHeating rate

Ash Content Tester

Ash Content Tester LACT-A10

{"Controlled\u00a0temperature":"775 \u00b125 \u2103","Temperature rising time of empty chamber":"\u2264 50 min","Furnace temperature uniformity":"\u2264 15\u2103","Internal dimension":"200 \u00d7 120 \u00d7 80 mm","External dimension":"490 \u00d7 490 \u00d7 450 mm","Power consumption":"2.5 kW","Power supply":"AC 220V \u00b110%, 50 Hz","Net weight":"35 kg"}Electric Muffle Furnace
{"Maximum control temperature":"1200 \u2103","Dimension":"500 \u00d7 300 \u00d7 235 mm","Power consumption":"5000 W","Power supply":"AC 220\u00b110% V, 50Hz","Net weight":"5 kg"}Temperature controller
{"Heating power":"(1 to 6) grades, continuously adjustable","Temperature":"400\u2103","Diameter of heating plate":"\u03a6 180 mm","Dimension":"280 \u00d7 250 \u00d7 90 mm","Power consumption":"2000 W","Power supply":"AC 220\u00b110%V, 50Hz"}Electric heating plate

Other Instrument

Insulating Oil Breakdown Voltage Tester LIBT-A23

AC 220 V ± 5 % , 50HzPower supply
0 ~ 75 kVMeasurement range
3 kV ± 10 % / sVoltage rising rate
2.5 mmDistance between electrodes

Mechanical Impurity Tester (Weight Method) LMIT-A21

390 x 260 x 590 mmDimension
≤ 1200 WTotal power consumption
AC 220 V ± 10 %, 50 HzPower supply
1000 WHeating power of water bath

Wax Oil Content Tester LWCT-A22

AC 220 V ± 10 %, 50 HzPower supply
RT ~ 90 ℃ ± 5 ℃Temperature controlling range in water bath
(-35) ℃ ± 1 ℃Cooling bath temperature
35 ℃ ± 1 ℃Evaporation temperature

Penetrometer

Penetrometer LMPT-A11

0 to 600 penetration scaleMeasurement range
5 sec or 60 secTiming controller
± 0.1 secondsTime accuracy
0.01 mmResolution

Penetrometer LMPT-A10

0 to 600 penetration scaleMeasurement range
5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 secTiming controller
± 0.1 secondsTime accuracy
0.01 mmResolution

Penetrometer LMPT-A12

{"Measurement range":"0 to 600 penetration scale","Timing controller":"5 sec or 60 sec","Time accuracy":"\u00b1 0.1 seconds","Resolution":"0.1 penetration","Penetration accuracy":"\u00b1 1 penetration","Weight of standard needle":"2.5 \u00b1 0.05 g","Dimensions (W \u00d7 L \u00d7 H)":"700 \u00d7 400 \u00d7 750 mm","Weight":"30 kg"}Penetrometer
{"Bath volume":"3.5 L","Temperature range":"5 \u00b0C to 60 \u00b0C","Temperature accuracy":"\u00b1 0.1 \u00b0C","Circulatory water quantity":"3 L\/minute","Pump Lift":"2 m","Power consumption":"1200 W","Power supply":"AC 220V \u00b1 10 %, 50 Hz","Dimensions (W \u00d7 L \u00d7 H)":"600 \u00d7 400 \u00d7 650 mm","Weight":"40 kg"}Circulatory Water Bath

Engler Viscometer

Engler Viscometer LEV-A10

200 ± 0.2 mlGraduated Flask
51 ± 1 sStandard Water Value
0 ~ 100 °CTemperature Range
± 0.2 °CTemperature Controlling Accuracy

Engler Viscometer LEV-B10

200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials)Graduated Flask
51 ± 1 sStandard Water Value
0 ~ 100 °CTemperature Range
10 °C ~ 40 °CAmbient Temperature

Engler Viscometer LEV-A11

100 mlGraduated Flask
51 ± 1 sStandard Water Value
0 ~ 100 °CTemperature Range
± 0.1 °CTemperature Controlling Accuracy