LCFP-A13 is designed with RS-323 and 485 computer ports which can calibrate the effect of barometric pressure to the test and calculate the modified value. It modifies system deviation automatically and can simulate and show temperature-time curve. It is designed as per “Test Methods for Flash Point of Petroleum Products (Closed Cup Methods)” ASTM D93.
| Ambient temperature | 10 °C ~ 40 ℃ |
|---|---|
| Relative humidity | ≤ 80 % |
| Ignition Mode | electron igniter / gas flame |
| Temperature range | Room Temperature ~ 300 ℃ |
| Aperture of ignition device | |
| Standard oil cup-Inner diameter | |
| Standard oil cup- Depth | |
| Standard oil cup- Depth of Marked line on the oil cup | |
| Standard oil cup-Oil sample cubage | |
| Stirring speed | |
| Stirring blade | |
| Sample temperature rising rate | |
| Measurement Range | Room Temperature ~ 300 ℃ |
| Flash Point | |
| Resolution | 0.1 ℃ |
| Repeatability | ≤ 2 ℃ |
| Reproducibility | ≤ 4 ℃ |
| Accuracy | 0.005 |
| Precision | |
| Gas Flame | |
| Heating power | |
| Dimension | |
| Total Power Consumption | 300 W |
| Power supply | AC 220 V ± 10 %, 50 Hz |
| Net Weight |
It is used to determine the flash point of diesel and other fuel types in petrochemical analysis, flavors in food testing, paints in materials testing, and waste removal for environmental analysis
