Density Tester LDMT-A10

Name: Density Tester LDMT-A10
Brand: Labtron.best
SKU: LDMT-A10
Rating: 4.8 (625 reviews)

Labtron LDMT-A10 density tester is simple and compact. The control box adopts humanized design and the control switch adopts light-touch mode. The instrument is designed and made as per ASTM D1298 “Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter Methods)”.

Name

Company Name

Product

Message

Captcha

Refersh

Cubage of bath	Ф300 × 380 mm
Temperature controlling range	0 °C ~ 100 °C
Temperature controlling accuracy	± 0.2 °C
Temperature sensor	Industrial platinum resistance, Pt100
Thermometer	Total immersion mercury thermometer
Scale division	0.2 °C
Heating power	700 W; 1000 W
Power supply	AC 220 V ± 10 %, 50 Hz

- Fast control rate and small over-shoot
- Adopts intelligent LCD temperature controller
- Unvarying vessel temperature
- Easy to operate and observe the sample
- Refrigeration device (Optional)
It is used to determine the density of crude petroleum and liquid petroleum.
Density Tester LDMT-A10

Constant Temperature Needle Penetration Tester

Constant Temperature Needle Penetration Tester LTNP-A10

0 to 700 taper degree (digital display table 0-70 mm)Measuring range
Timing error is less than ±0.1 sTiming device
0.01 mm Resolution
±1 cone insertion degreeNeedle insertion accuracy

Automatic Thermogravimetric Analyzer

Automatic Thermogravimetric Analyzer LTGA-A10

Room temperature to 1000 ºC Temperature range
0.1 ºCTemperature resolution
±0.1 ºCTemperature fluctuation
1 ~ 80 ºC / minHeating rate

Automatic Dielectric Tester

Automatic Dielectric Tester LADT-A10

2.0 kVACapacity
2 k V/ sSpeed of voltage increase
0.01Voltage inspection accuracy
< 0.1 kVBreakdown sensitivity

Other Instrument

Mechanical Impurity Tester (Weight Method) LMIT-A21

390 x 260 x 590 mmDimension
≤ 1200 WTotal power consumption
AC 220 V ± 10 %, 50 HzPower supply
1000 WHeating power of water bath

Wax Oil Content Tester LWCT-A22

AC 220 V ± 10 %, 50 HzPower supply
RT ~ 90 ℃ ± 5 ℃Temperature controlling range in water bath
(-35) ℃ ± 1 ℃Cooling bath temperature
35 ℃ ± 1 ℃Evaporation temperature

Insulating Oil Breakdown Voltage Tester LIBT-A23

AC 220 V ± 5 % , 50HzPower supply
0 ~ 75 kVMeasurement range
3 kV ± 10 % / sVoltage rising rate
2.5 mmDistance between electrodes

Low Temperature Tester

Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15

New-type refrigeration compressorRefrigeration system
Cold trough I: RT ~ (-51) °C, ± 1°; Cold trough II:RT ~ (-80) °C, ± 1 °CControlling temperature of cold trough
≤ 30 ℃Ambient temperature
≤ 85 %Relative humidity

Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12

(-10)℃ ~ 35 ℃Ambient temperature
≤ 85 %Relative humidity
31.0 ~ 32.0 mmSample cup Inner diameter
1.0 ~ 1.5 mmSample cup Wall thickness

Solidifying Point Tester LLTT-A13

± 0.5 ℃Temperature controlling accuracy
New-type refrigeration compressorRefrigeration system
Two holes in one trough, and same temperatureCold trough
≤ 30 ℃Ambient temperature