Petroleum Testing

Automatic Bomb Calorimeter LABC-A10

Calorimeter typeIsoperibol
Temperature range5 to 40°C
Measurement range5 to 40 MJ/ kg
Operation ModeThe outer barrel temperature is constant

Automatic Bomb Calorimeter LABC-A11

Calorimeter typeIsoperibol
Temperature range5 to 40°C
Measurement range5 to 40 MJ/ kg
Operation ModeA. Outer barrel temperature follows room temperature change mode Or B. Outer barrel temperature constant mode

Automatic Bomb Calorimeter LABC-B10

Calorimeter typeIsoperibol
Oxygen fillingFully automatic oxygen filling & releasing, fully automatic bomb raising & lowering
Bomb volume250 ml
Analysis time< 8 min full test process: <10 min

Automatic Bomb Calorimeter LABC-B11

Calorimeter typeIsoperibol
Oxygen fillingSemi-automatic
Bomb volume282 ml
Analysis time15 to 25 min

Octane Number and Cetane Number Tester LOCT-A10

Measuring Range For Aviation Gasoline86.0 to 105.0/MON
Measuring Range For Gasoline For Motor VehiclesNational standard: 65.0 to 110.0/RON
National-V standard: 70 to 115.0/RON
Blended gasoline: 75.0 to 120.0/RON
Light gasoline: 50.0 to 85.0 /MON
Isomerized gasoline: 85.0 to 120.0/RON
Arene gasoline: 90.0 to 120.0/RON
Measuring Range For EthanolE93: 92.0 to 95.0/RON
E97: 95.0 to 99.0/RON
Judgement: 60.0 to 120.0/RON
Measuring Range For Automobile Diesel FuelsCetane number: 25 to 75/CN
Cetane index: 20 to 80/CI

Portable Octane Number and Cetane Meter LOCT-A20

Measurement itemmotor gasoline and diesel
measurement unit of octane is ON40 to 120
Permissible error of octane± 0.5 max
Fluctuate range of octane± 0.2 max

Water Soluble Acid and Alkali Tester LAAT-A10

Graduated flask100 ml，50 ml
Conical flask100ml
Separatory funnel250ml
Ambient temperature(-10 )°C to 35 °C

Acid Number and Acidity Tester LAAT-A11

Ambient temperature≤ 35 °C
Relative humidity≤ 85 %
Precision of titration tubeScale division is 0.02 ml
Total power consumption≤ 1200 W

Acid Number Tester LAAT-A12

Measurement range≥0.05 mg KOH/g
Potential measurement range0 to 1800.0 mV
Burette volume10 mL
Minimum titration volume0.001 ml

Base Number Tester LAAT-A13

Volumetric analysisTitration condensation: 0.1 N;
Controlling accuracy: ≤ ± 0.02 ml
Automatic acid titrationTitration condensation: 0.1 N;
Controlling accuracy: ≤ ± 0.1 pH
Automatic potential controlTitration condensation: 0.1 N;
Controlling accuracy: ≤ 10 mV
Ambient temperature0 ~ 35 ℃

Aniline Point Tester LAPT-A10

Measurement rangeRoom temperature ~ 150°C
Stirring speed0 ~ 1200 r / min
Heating power25 W
Interior Dimension360 × 250 × 545 mm

Aniline Point Tester LAPT-A11

Temperature controlling accuracy≤ 0.5 ℃
Temperature controlling rangeRoom temperature ~ 200 ℃
Power supply for illumination5 V
Power of motor2 kW

PMCC Flash Point Tester LCFP-A10

Ambient temperature≤ 35 °C
Relative humidity≤ 85 %
Temperature range5 °C ~ 110 °C, Each scale division is 0.5 °C; 20 °C ~ 150 °C, Each scale division is 1.0 °C; 90 °C ~ 370 °C, Each scale division is 2 °C
Aperture of ignition device0.8 mm

Automatic PMCC Flash Point Tester LCFP-A11

Ambient temperature10 °C ~ 40 °C
Relative humidity≤ 80 %
Measurement RangeAmbient Temperature ~ 250 °C
Flash PointLower than 104 °C , error is 2 °C; Higher than 104 °C , error is 6 °C

Automatic PMCC Flash Point Tester LCFP-A13

Ambient temperature10 °C ~ 40 ℃
Relative humidity≤ 80 %
Ignition Modeelectron igniter / gas flame
Temperature rangeRoom Temperature ~ 300 ℃

Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10

Ambient temperatureRoom temperature to 35 °C
Relative humidity≤ 85 %
Timing range1 s to 9 min 59 s
Temperature controlling rangeRoom temperature to 99.9 °C

Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11

Ambient temperatureRoom temperature to 35 °C
Relative humidity≤ 85 %
Temperature controlling rangeRoom temperature to 99.9 °C
Temperature controlling accuracy± 1 °C

Density Tester LDMT-A10

Cubage of bathФ300 × 380 mm
Temperature controlling range0 °C ~ 100 °C
Temperature controlling accuracy± 0.2 °C
Temperature sensorIndustrial platinum resistance, Pt100

Automatic Distillation Apparatus LADA-A10

Heating power2 kW
Cooling power0.5 kW
Steam temperature0 to 400℃
Oven temperature0 to 500℃

Benzene Distillation Tester (Low Temperature) LDT-A11

Ambient temperature-10°C to 35°C
Relative humidity≤ 85 %
ThermometerEach one for 70°C to 90°C , 100°C to120°C , and 125°C to 150°C
Scale division0.1 ℃

Distillation Tester Dual Units LDT-A15

Graduated flasks100 ml
Scale division of graduated flask1ml
Distillation flask125 ml
Ambient temperature≤ 35 °C

Distillation Tester (low temperature Double units) LDT-A16

Graduated flasks100 ml
Distillation flask125 ml
Ambient temperature≤ 35 °C
Relative humidity≤ 85 %

Distillation Tester Front Type LDT-A14

Distillation flask125 mL
Ambient temperatureRoom temperature to 35 °C
Relative humidity≤ 85 %
Thermometer(-2 )°C to 300 ℃ and (-2) °C to 400 ℃

Distillation Tester LDT-A10

Graduated flasks10 ml and 100 ml
Scale division of graduated flask10 ml is 0.1 ml and 100 ml is 1 ml
Ambient temperature(-10) °C ~ 35 °C
Relative humidity≤ 85 %

Distillation Tester LDT-A12

Graduated flasks100 ml
Scale division of graduated flask1 ml
Outer diameter of distillation flaskφ65
Refrigeration tubeφ14

Distillation Tester (low temperature single unit) LDT-A17

Graduated flasks100 ml
Distillation flask125 mL
Ambient temperature≤ 30 °C
Relative humidity≤ 85 %

Vacuum Distillation Tester LDT-A13

Ambient temperature5 °C to 35 ℃
Relative humidity≤ 85 %
Cubage of buffer vessel1000 ml
Max. Residual pressure≤ 2 mm Hg

Dropping Point Tester (Oil Bath) LDPT-A10

Beaker quantity600 ml
Ambient temperature(-10) °C ~ 40 °C
Relative humidity≤ 85 %
Thermometer Measurement range(-5) °C ~ 300 °C

Dropping Point Tester (Air bath) LDPT-A11

Ambient temperature≤ 35 ℃
Relative humidity≤ 85 %
Heating power of electric furnace250 W × 2
Total power consumption≤ 700 W

Engler Viscometer LEV-A10

Graduated Flask200 ± 0.2 ml
Standard Water Value51 ± 1 s
Temperature Range0 ~ 100 °C
Temperature Controlling Accuracy± 0.2 °C

Engler Viscometer LEV-A11

Graduated Flask100 ml
Standard Water Value51 ± 1 s
Temperature Range0 ~ 100 °C
Temperature Controlling Accuracy± 0.1 °C

Engler Viscometer LEV-B10

Graduated Flask200 ± 0.2 ml (50 ± 0.2 ml for bituminous materials)
Standard Water Value51 ± 1 s
Temperature Range0 ~ 100 °C
Ambient Temperature10 °C ~ 40 °C

Existent Gum Tester LEGT- B30

Bath typeOil bath
Bath capacity5000 ml ± 50 ml
Ambient temperatureRoom temperature to 35 °C
Relative humidity≤ 85 %

Existent Gum Tester LEGT- B31

Evaporation bath type and sizeAluminum block bath, φ260 × 130 mm
Holes for testing3 pieces
Size of holes for testing cylinderφ51 × 70 mm
Flow rate displayFlow meter

Existent Gum Tester LEGT- B32

Evaporation bath type and sizeAluminum bath φ260 × 130 mm
Holes for testing5 pieces
Size of holes for testing cylinderφ51 × 70 mm
Working temperature160 ℃ ~ 165℃

Kinematics Viscometer LKV-A11

Ambient temperature(-10) °C ~ 35 °C
Relative humidity≤ 85 %
Capillary viscometer11 pieces
Stirring motor6 W, 1200 rpm

Kinematics Viscometer LKV-A12

Ambient temperature(-10) °C ~ 35 °C
Relative humidity≤ 85 %
Capillary viscometer11 pieces
Stirring motor6 W, 1200 rpm

Kinematics Viscometer LKV-A13

Ambient temperature(-10) °C ~ 35 °C
Relative humidity≤ 85 %
Capillary viscometer7 pieces of Cannon-Fenske reserve-flow capillary viscometer tubes in a group
Stirring motor6 W, 1200 rpm

Low Temperature Kinematic Viscosity Tester LKV-A14

Ambient temperature≤ 30 °C
Relative humidity≤ 85 %
Capillary viscometer13 pieces
Stirring motor6 W, 1200 rpm

Kinematics Viscometer LKV-A15

Ambient temperature(-10) °C ~ 35 °C
Relative humidity≤ 85 %
Capillary viscometer11 pieces
Stirring motor6 W, 1200 rpm

Kinematics Viscometer LKV-A16

Ambient temperature0 ~ 40 ºC
Relative humidity20 ~ 90 %, RH while 40 ℃
Temperature controlling accuracy± 0.1 °C
Timing range0.0 s ~ 9999.9 s

Kinematics Viscometer LKV-A10

Ambient temperature15 to 35°C
Relative humidity≤ 85%
Capillary viscometer6 capillary Pinkevitch viscometer tubes
Stirring motor1200 rpm

Open Cup Flash Point Tester LOFP-A10

Thermometer0 ℃ ~ 360 °C
Scale Division1 °C
Ambient Temperature≤ 35 °C
Relative Humidity≤ 85 %

Cleveland Open Cup Flash Point Tester LOFP-A11

Thermometer6 ℃ ~ 400 ℃
Scale Division2 °C
Spout Aperture0.6 ~ 0.8 mm
Ambient Temperature-10 ℃ ~ 50 ℃

Automatic COC Flash & Fire Point Tester LOFP-B10

Ambient Temperature10 ℃ ~ 40 ℃
Relative Humidity≤ 85 %
Temperature Measurement- Full ScaleAmbient temperature to ~ 400 ℃
Temperature Measurement- Repeatability≤ 4 ℃

Automatic Cleveland Open Cup Flash Point Tester LOFP-A12

Ambient Temperature10 ℃ ~ 40 °C
Relative Humidity≤ 80 %
Temperature Measurement- Full ScaleAmbient temperature to 300 °C
Temperature Measurement- Repeatability≤ 8 °C

Mechanical Impurity Tester (Weight Method) LMIT-A21

Dimension390 x 260 x 590 mm
Total power consumption≤ 1200 W
Power supplyAC 220 V ± 10 %, 50 Hz
Heating power of water bath1000 W

Wax Oil Content Tester LWCT-A22

Power supplyAC 220 V ± 10 %, 50 Hz
Temperature controlling range in water bathRT ~ 90 ℃ ± 5 ℃
Cooling bath temperature(-35) ℃ ± 1 ℃
Evaporation temperature35 ℃ ± 1 ℃

Insulating Oil Breakdown Voltage Tester LIBT-A23

Power supplyAC 220 V ± 5 % , 50Hz
Measurement range0 ~ 75 kV
Voltage rising rate3 kV ± 10 % / s
Distance between electrodes2.5 mm

Color Tester LCT-A20

Light source220 V, 100 W
Temperature of grinding milk white light bulb2750 ± 50 K
Light hole( Φ14)26 pieces
Color comparing tubeΦ32 mm

Automatic Lubricating Oils Oxidation Stability Tester LOST-D10

Samples2
Oil bath cubage30 L
Angle between bomb and water surface30 °
Speed of rotary assembly100 ± 5 RPM

Transformer Oil Oxidation Stability Tester LOST-D11

Samples6
Temperature controlling modeAutomatic digital temperature
Temperature controlling rangeRoom temperature ~ 160 °C
Temperature controlling accuracy± 0.2 °C

Distillate Fuel Oil Oxidation Stability Tester LOST-D12

Samples8
Temperature100 ℃
Temperature controlling accuracy0.1 ℃
Flow meter3 ± 0.3 L / H oxygen

Oxidation Stability Tester (Lubricating Grease) LOST-D20

Temperature RangeAmbient to 150℃
Temperature Precision± 0.1°C
Test Unit2 units
Heating Power1800 W

Gasoline Oxidation Stability Tester LOST-D13

TypeCompact; Desktop
DesignIntegrated
BathMetal bath (without water usage)
Temperature control point of metal bath100℃ ± 1℃

Oxygen Bomb Calorimeter LBC-C21

Temperature controlling range10 ℃ ~ 35 ℃
Temperature resolution0.001 ℃
Mean value of heat capacity15 kJ / K
Ambient temperature20 ℃ ± 5 ℃

Oxygen Bomb Calorimeter LBC-C22

Temperature measurement range10 ~ 35 ℃
Repeatability error≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb20 MPa
Operation environment temperature15 ~ 28 ℃

Oxygen Bomb Calorimeter LBC-C20

Heat capacity14000 ~ 15000 J / K
Temperature measurement range10 ~ 35 ℃
Repeatability error≤ 0.2 % (Grade C)
Endured pressure in oxygen bomb20 MPa

Carbon Residue Tester (CONRADSON METHODS) LRCT-B10

Porcelain crucible30 ml
Inner iron crucible75 ml
Outer iron crucible190 ml
BurnerMig Burner

Carbon Residue Tester (Digital Temperature Controlled Electric Furnace Methods) LRCT-B11

Bath typeFour holes with a furnace
Heating typeElectric resistance furnace
Temperature controlling range0 ~ 520 °C
Temperature controlling accuracy± 5 °C

Carbon Residue Tester (Ramsbottom) LRCT-B20

Coking furnaceMetal furnace
Heating modeElectric heating
Test unit5 units
Temperature rangeAmbient to 550°C

Rotational Viscometer LRV-A10

Viscosity measurement range10 ~ 2000000 MPa•s
Ambient temperature5 °C ~ 35 °C
Ambient humidityNot more than 80 %
SpindlesFour spindles of No.1 ~ 4

Copper Strip Corrosion Tester LRCT-A13

Sample hole4 pieces
Sample quantity4 to 12 pieces
Ambient temperatureRoom temperature to 35 °C
Temperature controlling rangeRoom temperature to 100°C

Liquefied Petroleum Gas Copper Corrosion Tester LRCT-A10

Sample hole2 pieces
Speed of stirring motor1400 rpm
Ambient temperature10 to 35°C
Temperature controlling rangeRoom Temperature to 100°C

Lubricating Oil Rust Characteristics Tester LRCT-A11

Sample hole4 pieces
Speed of stirring motor1400 rpm
Speed for sample stirring1000 ± 50 rpm
Ambient temperatureRoom temperature to 35°C

Rust Characteristics and Corrosion Tester LRCT-A12

Sample hole4 pieces
Ambient temperatureRoom temperature to 35°C
Temperature controlling range0 to 100°C
Temperature controlling accuracy± 1°C

X-ray Fluorescence Sulfur in Oil Analyzer LST-A10

Sample quantity2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)
Measurement time60, 120, 240, 300, and 600 s at random
Measurement range7 ppm to 5 %
Repeatability< 0.029 (S + 0.6)

Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11

Air flow rateNot less than 150 L / h
Max. Preset time99 min 59 s (100 min)
Chamber diameter of ovenΦ22 mm
Heating power of oven1400 W × 2

Vapor Pressure Tester (REID METHOD) LVPT-C10

Operation temperature of water bathRT ~ 90 °C
Temperature controlling accuracy± 0.1 °C
Dimensions550 × 520 × 102 mm
Pressure meter accuracy± 0.4 % kPa

Petroleum Products Vapor Pressure Tester（REID METHODS) LVPT-C11

Test bombTwo samples or a group of parallel samples
Bath temperature37.8 °C
Temperature controlling accuracy0.1 °C
Dimensions500 × 560 × 680 mm, 950 × 540 × 720 mm

Coulometric Karl Fischer Titrator LWT-A30

Ambient Temperature10°C to 35°C
Measurement Range0 to 100 mg
Resolution0.1 µg
Max. Electrolysis Speed40 µg /s

Water Content Tester LWT-A10

Ambient Temperature Range≤ 35°C
Relative Humidity≤ 85%
Heating Mantle Cap Power1000 W
Sample Determination1 at a time

Water Content Tester LWT-A11

Ambient Temperature Range≤ 35°C
Relative Humidity≤ 85%
Heating Mantle Cap Power1000 W × 2
Sample Determination2 at a time

Crude Petroleum Water Content Tester LWT-B10

Ambient Temperature Range-10 to 35°C
Relative Humidity≤85%
Distillation Flask1000 ml
Receiver5 ml, with 0.05 ml graduation

Coulometric Karl Fischer Titrator LWT-A31

Maximum current400 mA
Measurement range3 µg to 9999.9 µg
Resolution0.1 µg
Precision 1± 2 µg (3µg H₂O to 20µg H₂O)

Automatic Tag Closed Flash Point Tester LACF-A10

Experimental temperature range-50 to 70°C
Test sample volume50 ml
Ambient temperature range10 to 40°C
Humidity≤ 85%

Specific Gravity Tester LSGT-A10

Vessel Volume 4000 ml × 2
Power of Vacuum pump160 W
Negative power3.7 kPa（27.75 mmHg）
Power of shaking machine30 W

Automatic Dielectric Tester LADT-A10

Capacity2.0 kVA
Speed of voltage increase2 k V/ s
Voltage inspection accuracy0.01
Breakdown sensitivity< 0.1 kV

Automatic Softening Point Tester LSPT-A10

Measurement range32 ℃ to 160 ℃
Ambient temperature35 °C
Temperature resolution0.01 ℃
Beaker volume1000 mL

Automatic Thermogravimetric Analyzer LTGA-A10

Temperature rangeRoom temperature to 1000 ºC
Temperature resolution0.1 ºC
Temperature fluctuation±0.1 ºC
Heating rate1 ~ 80 ºC / min

Penetrometer LMPT-A10

Measurement range0 to 600 penetration scale
Timing controller5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 sec
Time accuracy± 0.1 seconds
Resolution0.01 mm

Penetrometer LMPT-A11

Measurement range0 to 600 penetration scale
Timing controller5 sec or 60 sec
Time accuracy± 0.1 seconds
Resolution0.01 mm

Penetrometer LMPT-A12

Penetrometer{"Measurement range":"0 to 600 penetration scale","Timing controller":"5 sec or 60 sec","Time accuracy":"\u00b1 0.1 seconds","Resolution":"0.1 penetration","Penetration accuracy":"\u00b1 1 penetration","Weight of standard needle":"2.5 \u00b1 0.05 g","Dimensions (W \u00d7 L \u00d7 H)":"700 \u00d7 400 \u00d7 750 mm","Weight":"30 kg"}
Circulatory Water Bath{"Bath volume":"3.5 L","Temperature range":"5 \u00b0C to 60 \u00b0C","Temperature accuracy":"\u00b1 0.1 \u00b0C","Circulatory water quantity":"3 L\/minute","Pump Lift":"2 m","Power consumption":"1200 W","Power supply":"AC 220V \u00b1 10 %, 50 Hz","Dimensions (W \u00d7 L \u00d7 H)":"600 \u00d7 400 \u00d7 650 mm","Weight":"40 kg"}

Penetrometer LMPT-A13

Measurement range0 to 600 penetration scale
Timing range0 sec to 60 sec
Time accuracy error≥ ± 0.1 seconds
Resolution0.1 penetration

Foaming Characteristics Tester LFCT-A10

Temperature RangeAmbient to 100°C
Temperature Precision± 0.1°C
Air Flow94 mL ± 5 mL/min, with flowmeters
Timing Unit0 to 99 min 59 s, resolution 1 s

Ash Content Tester LACT-A10

Electric Muffle Furnace{"Controlled\u00a0temperature":"775 \u00b125 \u2103","Temperature rising time of empty chamber":"\u2264 50 min","Furnace temperature uniformity":"\u2264 15\u2103","Internal dimension":"200 \u00d7 120 \u00d7 80 mm","External dimension":"490 \u00d7 490 \u00d7 450 mm","Power consumption":"2.5 kW","Power supply":"AC 220V \u00b110%, 50 Hz","Net weight":"35 kg"}
Temperature controller{"Maximum control temperature":"1200 \u2103","Dimension":"500 \u00d7 300 \u00d7 235 mm","Power consumption":"5000 W","Power supply":"AC 220\u00b110% V, 50Hz","Net weight":"5 kg"}
Electric heating plate{"Heating power":"(1 to 6) grades, continuously adjustable","Temperature":"400\u2103","Diameter of heating plate":"\u03a6 180 mm","Dimension":"280 \u00d7 250 \u00d7 90 mm","Power consumption":"2000 W","Power supply":"AC 220\u00b110%V, 50Hz"}

Mercaptan Sulfur Tester LMST-A10

Potential measuring range(0 to ±1999.5) Mv
Intrinsic error0.1 % ±0.5 mV
Input impedanceRi ≥1 × 1012 Ω
Burette capacity10 mL

Constant Temperature Needle Penetration Tester LTNP-A10

Measuring range0 to 700 taper degree (digital display table 0-70 mm)
Timing deviceTiming error is less than ±0.1 s
Resolution0.01 mm
Needle insertion accuracy±1 cone insertion degree

Petroleum Testing

Automatic Bomb Calorimeter

Octane Number & Cetane Number Tester

Acid and Alkali Tester

Aniline Test Equipment

Closed Cup Flash Point Tester

Demulsibility Characteristics Tester

Density Tester

Distillation Tester

Dropping Point Tester

Engler Viscometer

Existent Gum Tester

Kinematics Viscometer

Low Temperature Tester

Open Cup Flash Point Tester

Other Instrument

Oxidation Stability Tester

Oxygen Bomb Calorimeter

Residue Carbon

Rotational Viscometer

Rust and Corrosion Tester

Sulphur Content Tester

Vapor Pressure

Water Content Tester

Automatic Tag Closed Flash Point Tester

Specific Gravity Tester

Automatic Dielectric Tester

Automatic Softening Point Tester

Automatic Thermogravimetric Analyzer

Penetrometer

Foaming Characteristics Tester

Ash Content Tester

Mercaptan Sulfur Tester

Constant Temperature Needle Penetration Tester

Automatic Bomb Calorimeter LABC-A10

Automatic Bomb Calorimeter LABC-A11

Automatic Bomb Calorimeter LABC-B10

Automatic Bomb Calorimeter LABC-B11

Octane Number and Cetane Number Tester LOCT-A10

Portable Octane Number and Cetane Meter LOCT-A20

Water Soluble Acid and Alkali Tester LAAT-A10

Acid Number and Acidity Tester LAAT-A11

Acid Number Tester LAAT-A12

Base Number Tester LAAT-A13

Aniline Point Tester LAPT-A10

Aniline Point Tester LAPT-A11

PMCC Flash Point Tester LCFP-A10

Automatic PMCC Flash Point Tester LCFP-A11

Automatic PMCC Flash Point Tester LCFP-A13

Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A10

Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester LDCT-A11

Density Tester LDMT-A10

Automatic Distillation Apparatus LADA-A10

Benzene Distillation Tester (Low Temperature) LDT-A11

Distillation Tester Dual Units LDT-A15

Distillation Tester (low temperature Double units) LDT-A16

Distillation Tester Front Type LDT-A14

Distillation Tester LDT-A10

Distillation Tester LDT-A12

Distillation Tester (low temperature single unit) LDT-A17

Vacuum Distillation Tester LDT-A13

Dropping Point Tester (Oil Bath) LDPT-A10

Dropping Point Tester (Air bath) LDPT-A11

Engler Viscometer LEV-A10

Engler Viscometer LEV-A11

Engler Viscometer LEV-B10

Existent Gum Tester LEGT- B30

Existent Gum Tester LEGT- B31

Existent Gum Tester LEGT- B32

Kinematics Viscometer LKV-A11

Kinematics Viscometer LKV-A12

Kinematics Viscometer LKV-A13

Low Temperature Kinematic Viscosity Tester LKV-A14

Kinematics Viscometer LKV-A15

Kinematics Viscometer LKV-A16

Kinematics Viscometer LKV-A10

Distillate Fuel Cold Filter Plugging Point Filter LLTT-A12

Solidifying Point Tester LLTT-A13

Solidifying Point and Cold Filter Plugging Point Tester LLTT-A15

Multifunctional Low Temperature Tester LLTT-A16