Labtron LLTT-A12 is designed with cold filter plugging point test along with proper cooling bath. Equipped as per “Test Methods for Cold Filter Plugging Point of Distillate Fuels”.
| Measurement range | |
|---|---|
| Temperature controlling accuracy | |
| Refrigeration system | |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | (-10)℃ ~ 35 ℃ |
| Relative humidity | ≤ 85 % |
| Refrigeration speed | |
| Repeatability for solidifying point | |
| Repeatability for pour point | |
| Reproducibility | |
| Pressure of cooling water | |
| The lowest temperature | |
| Sample cup Inner diameter | 31.0 ~ 32.0 mm |
| Sample cup Wall thickness | 1.0 ~ 1.5 mm |
| Sample cup Height | 115 ~ 125 mm |
| Pumping pressure | U type differential pressure meter 1961 Pa (200 mm H<sub>2</sub>O) |
| Dimensions | |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | ≤ 150 W |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It can be widely used in petroleum, chemical industries and environmental studies.
