Ash Content Tester LACT-A10

Name: Ash Content Tester LACT-A10
Brand: Labtron.best
SKU: LACT-A10
Rating: 4.8 (947 reviews)

Ash Content Tester LACT-A10 is the device composed of muffle furnace, temperature controller and electric heating plate. It is small size and needs less land with special fire-resistant material and heating components. The heating time is short and it has a long lifetime. It used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and petroleum products.

Name

Company Name

Product

Message

Captcha

Refersh

Electric Muffle Furnace	Controlled temperature: 775 ±25 ℃ Temperature rising time of empty chamber: ≤ 50 min Furnace temperature uniformity: ≤ 15℃ Internal dimension: 200 × 120 × 80 mm External dimension: 490 × 490 × 450 mm Power consumption: 2.5 kW Power supply: AC 220V ±10%, 50 Hz Net weight: 35 kg
Temperature controller	Maximum control temperature: 1200 ℃ Dimension: 500 × 300 × 235 mm Power consumption: 5000 W Power supply: AC 220±10% V, 50Hz Net weight: 5 kg
Electric heating plate	Heating power: (1 to 6) grades, continuously adjustable Temperature: 400℃ Diameter of heating plate: Φ 180 mm Dimension: 280 × 250 × 90 mm Power consumption: 2000 W Power supply: AC 220±10%V, 50Hz

- It is composed of muffle furnace, a temperature controller and electric heating plate
- Muffle furnace adopts all-in-one structure
- Equipped with special fire-resistant material and heating components
- Adjustable LED and designed with temperature controller
- The overshoot is small and temperature control is stable
- Material used cold-roll steel sheet of outer shell furnace
- Good anti-corrosion and long life time
Ash Content Tester is used to determine the ash in the range 0.001 to 0.180 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants.

Accessories No.	Name	Qty
1	Main unit	1 set
2	Temperature controller	1 set
3	Hot plate	1 set
4	Thermocouple	1 piece
5	Compensation lead wire	1 piece
6	Porcelain crucible (50ml)	10 piece
7	Porcelain crucible (100ml)	10 piece
8	Crucible tong	1 piece
9	Fuse	2 piece

Ash Content Tester LACT-A10

Sulphur Content Tester

Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11

Not less than 150 L / hAir flow rate
99 min 59 s (100 min)Max. Preset time
Φ22 mmChamber diameter of oven
1400 W × 2Heating power of oven

X-ray Fluorescence Sulfur in Oil Analyzer LST-A10

2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)Sample quantity
60, 120, 240, 300, and 600 s at randomMeasurement time
7 ppm to 5 %Measurement range
< 0.029 (S + 0.6)Repeatability

Specific Gravity Tester

Specific Gravity Tester LSGT-A10

4000 ml × 2Vessel Volume
160 WPower of Vacuum pump
3.7 kPa（27.75 mmHg）Negative power
30 WPower of shaking machine

Vapor Pressure

Petroleum Products Vapor Pressure Tester（REID METHODS) LVPT-C11

Two samples or a group of parallel samplesTest bomb
37.8 °CBath temperature
0.1 °CTemperature controlling accuracy
500 × 560 × 680 mm, 950 × 540 × 720 mmDimensions

Vapor Pressure Tester (REID METHOD) LVPT-C10

RT ~ 90 °COperation temperature of water bath
± 0.1 °CTemperature controlling accuracy
550 × 520 × 102 mmDimensions
± 0.4 % kPaPressure meter accuracy

Automatic Dielectric Tester

Automatic Dielectric Tester LADT-A10

2.0 kVACapacity
2 k V/ sSpeed of voltage increase
0.01Voltage inspection accuracy
< 0.1 kVBreakdown sensitivity

Penetrometer

Penetrometer LMPT-A11

0 to 600 penetration scaleMeasurement range
5 sec or 60 secTiming controller
± 0.1 secondsTime accuracy
0.01 mmResolution

Penetrometer LMPT-A12

{"Measurement range":"0 to 600 penetration scale","Timing controller":"5 sec or 60 sec","Time accuracy":"\u00b1 0.1 seconds","Resolution":"0.1 penetration","Penetration accuracy":"\u00b1 1 penetration","Weight of standard needle":"2.5 \u00b1 0.05 g","Dimensions (W \u00d7 L \u00d7 H)":"700 \u00d7 400 \u00d7 750 mm","Weight":"30 kg"}Penetrometer
{"Bath volume":"3.5 L","Temperature range":"5 \u00b0C to 60 \u00b0C","Temperature accuracy":"\u00b1 0.1 \u00b0C","Circulatory water quantity":"3 L\/minute","Pump Lift":"2 m","Power consumption":"1200 W","Power supply":"AC 220V \u00b1 10 %, 50 Hz","Dimensions (W \u00d7 L \u00d7 H)":"600 \u00d7 400 \u00d7 650 mm","Weight":"40 kg"}Circulatory Water Bath

Penetrometer LMPT-A10

0 to 600 penetration scaleMeasurement range
5 sec, 8 sec, 10 sec, 12 sec, 30 sec and 60 secTiming controller
± 0.1 secondsTime accuracy
0.01 mmResolution