Labtron LLTT-A23 is manufactured with SCM as the core control system. It is also deliberately fabricated with colored touch screen, detecting sensor and semiconductor refrigeration technology. It is designed and made as per ASTM D2386 Standard Test Method for Solidifying Point of Petroleum Products, ASTM D97 Standard Test Method for Pour Point of Petroleum Products.
| Measurement range | |
|---|---|
| Temperature controlling accuracy | |
| Refrigeration system | |
| Bath stirrer | |
| Sample stirrer | |
| Cold trough | |
| Controlling temperature of cold trough | |
| Constant temperature bath Cubage | |
| Constant temperature bath Types | |
| Temperature Range | |
| Temperature sensor | |
| Stirring motor Power | |
| Stirring motor Speed | |
| Ambient temperature | ≤ 30 ℃ |
| Relative humidity | |
| Refrigeration speed | > 40 °C / 10 min |
| Repeatability for solidifying point | ≤ 2 °C |
| Repeatability for pour point | ≤ 3 °C |
| Reproducibility | ± 4 °C |
| Pressure of cooling water | 0.5 kg / cm<sup>2</sup> |
| The lowest temperature | (-60) °C |
| Sample cup Inner diameter | |
| Sample cup Wall thickness | |
| Sample cup Height | |
| Pumping pressure | |
| Dimensions | 610 x 450 x 580 mm |
| Inner Dimensions | |
| Outer Dimensions | |
| Total power consumption | |
| Heating power | |
| Power supply | AC 220 V ± 10 %, 50 Hz |
It can be widely used in oil refineries, oil stations and other relevant institutions. It can be mainly used to determine the solidifying point and pour point of light oils which have good flow ability and low viscosity.
