Pulp beating (refining) freeness tester TP-C10

Name: Pulp beating (refining) freeness tester TP-C10
Brand: Labtron.best
SKU: TP-C10
Rating: 5 (909 reviews)

Pulp beating (refining) freeness tester TP-C10 is used to measure the rate of dilution of pulp suspended water materials and to determine de-watering time. It is adopted with spring pre-tightening mechanism keeps the rubber sealing ring of the sealing hammer body in contact with the bottom of the water filtering tube. This increases the sealing performance of the sealing hammer body.

Name

Company Name

Product

Message

Captcha

Refersh

Measurement range	0 to 100° SR
Slider weight
Slider size
Testing accuracy
Dimension of working plate
Speed of slider
Slider stroke
Specimen size
Division value
Number of specimen holders
Metal Cylinder inner area
Metal Cylinder height
Metal roller width
Metal roller weight
Absorbency paper
Absorbency speed
Sealed testing speed	100 ± 10 mm/s
Volume of distilled water	1000 ± 5 ml
Sample diameter
Sample error
Sample Thickness
Draining time	149 ± 1 s
Residual water volume	7.85 to 8 ml
Hydraulic pressure	>0.3 MPa
Dimension	450×250×1100 mm
Net Weight	40 kg

- Use of Schopper-Riegler test method for designing
- Adopted with spring pre-tightening mechanism
- Measurement range 0 to 100° SR
- Equipped with manual compression seal cone
- Simple user–friendly operations
Pulp beating freeness tester has applications in pulp & paper industry, packaging industry.
Pulp beating (refining) freeness tester TP-C10

Related Products of Paper Testing Instruments

Crush tester TP-L10

5 to 500 N, 50 to 3000 NMeasurement range
1 NResolution
± 1 %Accuracy
≤ 1 %Variability

Standard strip cutter TP-G10

15 mmSample width
300 mmSample maximum length
≤ 0.1 mmParallelism
240×520×70 mmDimension

Carton compression tester TP-I10

0.1 to 10 kNMeasuring range
< ± 1%Indication error
500×500 mm (customized)Platen Size
500 mm (customized)Operating stroke

Whiteness and chromaticity tester TP-A10

Diameter ≥30 mm, Thickness ≤ 40 mmSample (size) length
Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, bMeasurement mode
≤ 0.1 within 30 minStability
Chromaticity co-ordinate 0.0001Accuracy

Tensile Stiffness Tester TP-B10

38×70 mmSample (size) length
(1-500) mN.m (divided into 7 small ranges)Measuring range
0.02Indication error
(200° ± 20°)/ minTest speed

Electronic bending stiffness tester TP-E10

200° ± 20° / minTesting speed
1 to 10000 mNTest range
± 1 %Indicating Error
5, 10, 15, 20, 25, 50 mmTesting length

Electronic Tearing tester TP-J21

10 -16000 mNCapacity
0.1 mNResolution
104 ± 1 mmTearing arm
27.5° ± 5°Tearing angle

Mullen burst tester TP-K11

0 to 1600 kPaMeasurement range
± 0.5 % F.S.Accuracy
95 ± 5 ml/minCompression speed
≥ 430 kPaClamp pressure

Internal Ply bond Tester TP-J11

A: 20 to 500 J/m2 B: 500 to 1000 J/m2Capacity
90°Impact angle
Lb-ft/in2 J/m2Unit
A: ± 1 J/m2 B: ± 2 J/m2Error

Automatic horizontal tensile tester TP-B12

180 mm (180, 150, 100, 90, 50 mm adjustable)Sample (size) length
15 mmSample width
0 to 30, 0 to 100 N,0 to 300 N, 0 to 500 N, 0 to 1000 NMeasuring range
± 1 %Accuracy

Automatic horizontal tensile tester TP-B11

90 to 200 mmSample (size) length
15 mm, 25 mm, 50mmSample width
0 to 30, 0 to 100 N,0 to 300 NMeasuring range
± 1 %Accuracy

Mullen burst tester TP-K10

0 to 5600 kPaMeasurement range
± 0.5 % F.S.Accuracy
170 ± 15 ml/minCompression speed
≥ 690 kPaClamp pressure

Coefficient of friction tester TP-D10

0.01 to 10 NMeasurement range
200 gSlider weight
63×63 mmSlider size
± 2 %Testing accuracy

Whiteness meter TP-A11

Diameter ≥30 mm, Thickness ≤ 40 mmSample (size) length
D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mmSystem
D65 as illuminating sourceLight source
≤ 0.1 %Zero drift

Water absorption tester TP-C20

0 to 200 mmMeasurement range
15×250 mmSpecimen size
1 mmDivision value
5Number of specimen holders

Soil Testing Instruments

Soil Salinity tester TSST-A10

0.00 to 19.99 ms/cmSalinity Measurement range
EC ± 2% full scaleMeasuring accuracy
-5 to 50°CTemperature Measurement range
± 0.5°CTemperature accuracy

Soil nutrient tester TSNA-A10

0.001 to 9999Measuring range
A (absorbency of light) <0.003 within 3 minsStability
<3.0 %Linearity error
A (absorbency of light) <0.005Repeatability error

Soil nutrient tester TSNA-A11

0.001 to 9999Measuring range
A (absorbency of light) <0.003 within 3 minsStability
<3.0 %Linearity error
A (absorbency of light) <0.005Repeatability error

Other Testing Instruments

Benchtop gloss meter TBGM-A10

60°Test angle
2 × 3 mmGloss aperture
0 to 1000 GUMeasurement range
0.2 GU (0 to 100 GU), 0.2 % GU (100 to 1000 GU)Repeatability

Plastic Testing Instruments

Oxygen Index Tester TOIT-A10

0.1 % O2Resolution
0 to 100 % O2Measuring range
± 0.4 % O2Precision
< 10 SResponse time

Aging Oven TAO-A10

300°CThe maximum temperature
Within ± 0.5°CTemperature fluctuation
Within ± 1°CTemperature uniformity
11 r/min to 12r/min, turntable dimension diameter: 285 mmRotate speed of the turntable

Vacuum Leak Tester TVLT-A10

0 to 90 KPaVacuum degree
1 % FSAccuracy
0.1 KPaResolution
270 × 210 mmVacuum chamber effective size

Paper Testing Instruments

Whiteness meter TP-A11

Diameter ≥30 mm, Thickness ≤ 40 mmSample (size) length
D/0 lighting geometrical viewing conditions, diffuser diameter (d) 150mm, testing hole diameter 30mmSystem
D65 as illuminating sourceLight source
≤ 0.1 %Zero drift

Whiteness and chromaticity tester TP-A10

Diameter ≥30 mm, Thickness ≤ 40 mmSample (size) length
Diffuse reflection factor Rx, Ry, Rz, stimulus value Y10, X10, Z10, chromaticity coordinates x10, y10, z10; lightness L *, chroma a * b *, chroma C * ab, hue angle h * ab, dominant wavelength λd, excitement purity Pe, color difference ΔE * ab, lightness difference ΔL *, chroma difference ΔC * ab, hue difference ΔH * ab, Hunter system L , A, bMeasurement mode
≤ 0.1 within 30 minStability
Chromaticity co-ordinate 0.0001Accuracy

Tensile Stiffness Tester TP-B10

38×70 mmSample (size) length
(1-500) mN.m (divided into 7 small ranges)Measuring range
0.02Indication error
(200° ± 20°)/ minTest speed

Rubber Testing Instruments

Three roll mill machine TRMM-A10

0.5 to 1 kg, 2 to 3 kg, 5 to 7 kgMixed capacity
RT to 300°CTemperature range
PID controlTemperature control system
LED displayDisplay

Rubber Low Temperature Brittleness Tester TRBT-A11

Room temperature to -70 ℃ (room temperature ≤ 25 ℃）Temperature control range
± 0.3 ℃Temperature accuracy
0℃ to -30℃ around 2.5 ℃/min
-30℃ to -40℃ around 2.5 ℃/min
-40℃ to -70℃ around 2.0 ℃/min
Impact speed
910 × 510 × 860 mmMax dimension L × W × H

DIN abrasion tester TDAT-A10

2.5 NTest arm weight
2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,Additional Loads
150 mmIdler
40 ± 0.2 MAbrasion stroke