Transformer Oil Oxidation Stability Tester LOST-D11

Name: Transformer Oil Oxidation Stability Tester LOST-D11
Brand: Labtron.best
SKU: LOST-D11
Rating: 5 (995 reviews)

Labtron LOST-D11 features metal bath for uniform heating, keeping the temperature constant. Equipped with pressure reducer ensuring constant output pressure of the gas cylinder when the pressure in the gas cylinder decreases. Furnished with 6 flow meters to adjust and indicate the flow rate in 6 oxidation tubes.

Name

Company Name

Product

Message

Captcha

Refersh

Samples	6
Temperature
Oil bath cubage
Angle between bomb and water surface
Speed of rotary assembly
Pressure sensor
Oil bath Temperature controlling range
Temperature controlling mode	Automatic digital temperature
Temperature controlling range	Room temperature ~ 160 °C
Temperature controlling accuracy	± 0.2 °C
Flow meter
Size
Power of heater
Power supply	220 V, 50 Hz
Power consumption	≤ 1100 W
Weight
Dimension

- Digital temperature controller for automatic mode
- Desktop type and compact
- Pressure reducer (ensuring constant output pressure)
- Digital timer (presetting and recording test time)
It can be widely used in petroleum, chemical industries, research and development laboratories.
Transformer Oil Oxidation Stability Tester LOST-D11

Related Products of Oxidation Stability Tester

Distillate Fuel Oil Oxidation Stability Tester LOST-D12

8Samples
100 ℃Temperature
0.1 ℃Temperature controlling accuracy
3 ± 0.3 L / H oxygenFlow meter

Oxidation Stability Tester (Lubricating Grease) LOST-D20

Ambient to 150℃Temperature Range
± 0.1°CTemperature Precision
2 unitsTest Unit
1800 WHeating Power

Gasoline Oxidation Stability Tester LOST-D13

Compact; DesktopType
IntegratedDesign
Metal bath (without water usage)Bath
100℃ ± 1℃Temperature control point of metal bath

Automatic Lubricating Oils Oxidation Stability Tester LOST-D10

2Samples
30 LOil bath cubage
30 °Angle between bomb and water surface
100 ± 5 RPMSpeed of rotary assembly

Sulphur Content Tester

Dark Petroleum Products Sulphur Content Tester (Tubular Oven Method) LST-A11

Not less than 150 L / hAir flow rate
99 min 59 s (100 min)Max. Preset time
Φ22 mmChamber diameter of oven
1400 W × 2Heating power of oven

X-ray Fluorescence Sulfur in Oil Analyzer LST-A10

2 to 3 ml (it is equal to sample depth of 3 mm to 4 mm)Sample quantity
60, 120, 240, 300, and 600 s at randomMeasurement time
7 ppm to 5 %Measurement range
< 0.029 (S + 0.6)Repeatability

Constant Temperature Needle Penetration Tester

Constant Temperature Needle Penetration Tester LTNP-A10

0 to 700 taper degree (digital display table 0-70 mm)Measuring range
Timing error is less than ±0.1 sTiming device
0.01 mm Resolution
±1 cone insertion degreeNeedle insertion accuracy

Open Cup Flash Point Tester

Open Cup Flash Point Tester LOFP-A10

0 ℃ ~ 360 °CThermometer
1 °CScale Division
≤ 35 °CAmbient Temperature
≤ 85 %Relative Humidity

Cleveland Open Cup Flash Point Tester LOFP-A11

6 ℃ ~ 400 ℃Thermometer
2 °CScale Division
0.6 ~ 0.8 mmSpout Aperture
-10 ℃ ~ 50 ℃Ambient Temperature

Automatic COC Flash & Fire Point Tester LOFP-B10

10 ℃ ~ 40 ℃Ambient Temperature
≤ 85 %Relative Humidity
Ambient temperature to ~ 400 ℃Temperature Measurement- Full Scale
≤ 4 ℃Temperature Measurement- Repeatability

Existent Gum Tester

Existent Gum Tester LEGT- B30

Oil bathBath type
5000 ml ± 50 mlBath capacity
Room temperature to 35 °CAmbient temperature
≤ 85 %Relative humidity

Existent Gum Tester LEGT- B32

Aluminum bath φ260 × 130 mmEvaporation bath type and size
5 piecesHoles for testing
φ51 × 70 mmSize of holes for testing cylinder
160 ℃ ~ 165℃Working temperature

Existent Gum Tester LEGT- B31

Aluminum block bath, φ260 × 130 mmEvaporation bath type and size
3 piecesHoles for testing
φ51 × 70 mmSize of holes for testing cylinder
Flow meterFlow rate display

Octane Number & Cetane Number Tester

Portable Octane Number and Cetane Meter LOCT-A20

motor gasoline and dieselMeasurement item
40 to 120measurement unit of octane is ON
± 0.5 maxPermissible error of octane
± 0.2 maxFluctuate range of octane

Octane Number and Cetane Number Tester LOCT-A10

86.0 to 105.0/MON Measuring Range For Aviation Gasoline
National standard: 65.0 to 110.0/RON
National-V standard: 70 to 115.0/RON
Blended gasoline: 75.0 to 120.0/RON
Light gasoline: 50.0 to 85.0 /MON
Isomerized gasoline: 85.0 to 120.0/RON
Arene gasoline: 90.0 to 120.0/RON Measuring Range For Gasoline For Motor Vehicles
E93: 92.0 to 95.0/RON
E97: 95.0 to 99.0/RON
Judgement: 60.0 to 120.0/RON Measuring Range For Ethanol
Cetane number: 25 to 75/CN
Cetane index: 20 to 80/CIMeasuring Range For Automobile Diesel Fuels