Multi-range pocket TDS tester LPTS-A20 comes with 1 - 3 points calibration system. Equipped with platinum sensor provides fast and reliable results. The battery indicator shows the remaining battery capacity on display screen. The System menu allows setting of up to 5 parameters. Equipped with reset features. It can measure TDS content of all liquids and low, mid, high concentration solutions.
| TDS range | 0 - 20 ppt |
|---|---|
| TDS accuracy | ± 1 % F.S. |
| TDS factor | 0.1 to 1.0 (default 0.5) |
| Calibration points | 1 - 3 points |
| TDS type range | Low range TDS |
| Calibration solutions | 100 ppm, 1000 ppm, 10 ppt |
| Type of sensor | Platinum sensor |
| Temperature compensation | 0 °C - 60 °C, Automatic |
| Temperature coefficient | 2 % per °C |
| Normalization temperature | 25 °C |
| Operating temperature | 0 °C - 60 °C, 32 °F - 140 °F |
| Connector | 6 pin |
| Display | LCD screen |
| Data hold function | Manual |
| Battery life | Approximately 150 hours |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Power | 2 × 1.5 V “AAA” |
| Dimension (L × dia.) | 185 × 40 mm |
| Weight | 100 g |
Multi-range pocket TDS tester can measure TDS content of solutions, liquids used in electroplating & printing industry, beverage industry, water & waste water, aquarium units.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
