Pocket Conductivity tester LPCT-A11 is equipped with platinum sensor & 1 point push button calibration system. The easy to use pocket conductivity meter comes with waterproof features design for protection against harsh conditions. Conductivity meter on the basis of its low, mid and high conductivity measurement range can be used for measuring conductivity of drinking water, waste water, brine water and liquids with high, low conductivity.
| Conductivity measurement range | 10 to 1999 µS/cm |
|---|---|
| Type of conductivity | Mid-range conductivity |
| Conductivity accuracy | ± 1 % F.S. |
| Conductivity calibration points | 1 point |
| Conductivity calibration solutions | 1413 µS/cm |
| Sensor type | Platinum sensor |
| Temperature compensation | 0 °C - 50 °C |
| Temperature coefficient | 2 % per °C |
| Cell constant | K=1 |
| Normalization temperature | 25 °C |
| Data hold function | Manual |
| Display | LCD screen |
| Power off | Manual or automatic (8 minutes after last key is pressed) |
| Power | 3 × 1.5 V “G134” batteries |
| Battery life | Approximately 150 hours |
| Dimension (L*dia.) | 185 × 40 mm |
| Weight | 100 g |
Pocket Conductivity tester on the basis of its low, mid and high conductivity measurement range can be used for testing conductivity of pure water, drinking water , waste water, brine solutions and liquids.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.
