Benchtop pH meter LBPM-A11

Name: Benchtop pH meter LBPM-A11
Brand: Labtron.best
SKU: LBPM-A11
Rating: 4.9 (986 reviews)

Benchtop pH meter LBPM-A11 comes with 0.0 to 14.00 pH range is suitable for daily measurements, testing. Automatic calibration can be performed at 2 points using standard USA or NIST pH buffers. It offers automatic or manual temperature compensation of pH measurements. The pH meter with sleek design has easy to read backlit LCD screen that display pH measurements & temperature simultaneously.

Name

Product

Message

Captcha

Refersh

pH measurement range	0.00 to 14.00 pH
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
Calibration points	2 points
Calibration solutions	USA (pH 4.0/7.00/10.01)
ORP measurement range
ORP accuracy
ORP calibration points
ORP calibration range
ORP calibration solutions
Temperature compensation	0 to 100°C
Compensation mode	Manual or automatic
mV range	-1999 to 1999 mV
mV accuracy	±1mV
mV resolution	1 mV
Temperature range	0 to 100°C, 32 to 212°F
Temperature accuracy	±1°C
Stability conditions
Calibration due
memory
Output
Temperature resolution	1°C
Hold function
Power off
Reset function
Connector	BNC
Display	LCD
Dimension (LWH)	210×205×65 mm
Weight	1.5 kg
Power	DC9V, Ac adapter, AC220V /50Hz

- Equipped with white backlit LCD display
- pH measurement range 0.0 to 14.00 pH
- 2 points calibration to automatically identify pH buffer
- Automatic electrode slope display, helps the operator when to replace the sensor
- Automatic temperature compensation for accurate measured value over the entire range
- Universal BNC connector
- Built-in solution holder
The benchtop pH meter can be used for daily measurement of pH & temperature at schools, colleges & research laboratories & water testing plants.
pH electrode
Temperature probe
pH buffer solutions (pH 4.0/7.00/10.01)
DC9V power adapter
pH buffer solutions USA (pH 4.0/7.00/10.01), NIST (pH 4.01/6.86/9.18)
Temperature sensor
pH probe for suitable measuring e.g. (pure water, liquids, semisolids substance
Benchtop pH meter LBPM-A11

Related Products of pH Meter (Benchtop)

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop pH meter LBPM-A20

-1.00 to 15.00 pHpH measurement range
± 0.01 pHpH accuracy
0.01 pHpH resolution
1-3 pointsCalibration points

Benchtop pH meter LBPM-B10

-2.000 to 20.000 pHpH measurement range
± 0.002 pHpH accuracy
1-5 pointsCalibration points
USA, NIST, DIN or user definedCalibration solutions

Benchtop pH Meter LBPM-B11

0 to 100°C, 32°F to 212°F Manual or AutomaticTemperature compensation
Manual or automatic endpoint detectionHold function
Standard or High-accuracyStability criteria
10, 30, 60 seconds, 10, 30 minutes or OffInterval readings

Benchtop Ion Meter

Benchtop Ion meter for Na, LBIM-A12

Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cl, LBIM-A10

Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for F, LBIM-A11

F range: 1 × 10⁶M – saturation, 0.02 ppm to saturationIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Water Activity Meter

Water Activity Meter with sensor LWAM-A10

Water activity 0 to 0.980 aw (no condensing )Measuring range
0 to 50°CTemperature range
± 0.015 awMeasurement accuracy
± 0.5°CTemperature accuracy

Water Activity Meter LWTM-A10

0 to 1.0 awRange
0 to 1.0 awResolution
± 0.02 awAccuracy
Nonconductive humidity sensorSensor

Portable Dissolve Oxygen Meter

Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.

Portable dissolved oxygen meter LPRDO-A11

0.0 - 20.0 mg / L (or ppm)Dissolved oxygen range
± 0.2 mg / LDissolved oxygen accuracy
0.01 mg / LResolution
1 - 2 pointsCalibration points

Portable Dissolved oxygen meter LPRDO-A10

0.0 to 20.0 mg / L (or ppm)Dissolved oxygen range
± 0.5 mg / LDissolved oxygen accuracy
0.1 mg / LResolution
1 - 2 pointsCalibration points

TSS Meter

TSS Meter LTSS-A10

20000 mg/L
0.01 mg/L ~ 45000 mg/L
0.01 mg/L ~ 120000 mg/LMeasurement range
± 2 % F.S. of its range ( Depending on the homogeneity of sludge)Measurement accuracy
≤ 0.4 MpaPressure range
≤ 2.5 m/s, 8.2 ft./sFlow rate

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A11

{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Multi parameter water quality analyzer LMWA-A10

{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity