Benchtop pH meter LBPM-A20 is a high performance pH meter with large LCD display to read pH & temperature measurements. With -1.00 to 15.00 pH range it is suitable for daily measurement of pH in research laboratories as well as water quality testing units. Automatic calibration can be performed at 1-3 points using standard USA or NIST pH buffers. It offers automatic or manual temperature compensation of pH measurements.
| pH measurement range | -1.00 to 15.00 pH |
|---|---|
| pH accuracy | ± 0.01 pH |
| pH resolution | 0.01 pH |
| Calibration points | 1-3 points |
| Calibration solutions | USA (pH 4.0/7.00/10.01), NIST (pH 4.01/6.86/9.18) |
| ORP measurement range | |
| ORP accuracy | |
| ORP calibration points | |
| ORP calibration range | |
| ORP calibration solutions | |
| Temperature compensation | 0 to 100°C, 32 to 212°F |
| Compensation mode | Manual or automatic |
| mV range | -1000 to 1000 mV |
| mV accuracy | ±1mV |
| mV resolution | 1 mV |
| Temperature range | 0 to 105°C, 32 to 221°F |
| Temperature accuracy | ±1°C |
| Stability conditions | |
| Calibration due | |
| memory | |
| Output | |
| Temperature resolution | 0.1°C |
| Hold function | Manual or automatic endpoint detection |
| Power off | Manual or automatic (180 minutes after last key is pressed) |
| Reset function | Yes |
| Connector | BNC |
| Display | LCD |
| Dimension (L*W*H) | 210×205×75 mm |
| Weight | 1.5 kg |
| Power | DC9V, AC adapter, AC220V/50Hz |
Benchtop pH meter is used for research education purpose, quality testing in water and waste water management plants, food and beverage industry & other liquids & solvents.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
