Benchtop Ion meter for Cn, LBIM-A21

Name: Benchtop Ion meter for Cn, LBIM-A21
Brand: Labtron.best
SKU: LBIM-A21
Rating: 4.8 (672 reviews)

Benchtop Ion meter for Cn, LBIM-A21 comes with (Cn ) cyanide ion selective electrode for cyanide ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Name

Company Name

Product

Message

Captcha

Refersh

Ion measurement range	Cn range: 5 × 10<sup>6</sup> – 0.01 M, 0.2 – 260 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

- Large LCD display
- 2 - 5 points calibration from low to high concentration
- Direct ion concentration readout for elaborate measurement process
- Selectable concentration units from ppm, mg / L, mol / L
- mV measurements to check the performance of ion selective electrode
- Temperature compensation provides accurate reading over the entire range
- Stability indicator to show current measurement status
- Calibration due reminder for regular calibration of the meter
- Auto hold function to freeze stable reading for better viewing & recording
- Automatic electrode diagnosis shows the slope of the sensor
- Reset setting function
- Expanded memory stores and recalls up to 500 readings
- Built –in real time clock stamps
- USB communication interface to transfer stored data to PC
Benchtop Ion meter is used to measure the cyanide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.
Cn Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter
Ion selective electrode: Cn range: 0.2 – 260 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor
Benchtop Ion meter for Cn, LBIM-A21

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for F, LBIM-A11

F range: 1 × 10⁶M – saturation, 0.02 ppm to saturationIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for K, LBIM-A23

K range: 1×10⁶ - 1M, 0.04 -39000 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

NH₄ range: 5 × 10⁶ – 1 M, 0.1 – 18000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Pb, LBIM-A25

Pb range: 1×10⁸ – 0.1M, 0.2-20700 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for S, LBIM-A24

S range: 1×10⁷ - 1M, 0.003-32100 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Na, LBIM-A12

Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for I, LBIM-A26

I range: 1×10⁸- 1M, 0.06 -127000 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cl, LBIM-A10

Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Br, LBIM-A14

Br range: 5 × 10⁶ - 1 M, 0.4 - 79900 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cd, LBIM-A28

Cd range: 1×10⁶– 1M, 0.01-11200 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

NH₃ range: 1 × 10⁶ - 1 M, 0.02 - 17000 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cu, LBIM-A27

Cu range: 1×10⁸ - 1M, 0.06-6400 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Ag, LBIM-A22

Ag range: 1 × 10⁷ - 1 M, 0.01 - 107900 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Ca, LBIM-A13

Ca range: 5 × 10⁷ - 1 M, 0.02 - 4000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

ORP Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket ORP tester LPOT-A10

Platinum sensorSensor type
6 pinConnector
(-999) to 999 mVORP measurement range
± 2 mVORP accuracy

Pocket ORP tester LPOT-A11

BNCConnector
(-999) to 999 mVORP measurement range
± 2 mVORP accuracy
1 mVORP resolution

TSS Meter

TSS Meter LTSS-A10

20000 mg/L
0.01 mg/L ~ 45000 mg/L
0.01 mg/L ~ 120000 mg/LMeasurement range
± 2 % F.S. of its range ( Depending on the homogeneity of sludge)Measurement accuracy
≤ 0.4 MpaPressure range
≤ 2.5 m/s, 8.2 ft./sFlow rate

Online pH Controller

Online pH Controller LOPC-A10

01.00 to 15.00 pHpH measurement range
1 to 3 pointspH calibration points
USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18)pH Buffer Solutions
± 0.01 pHpH accuracy

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A11

{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Multi parameter water quality analyzer LMWA-A10

{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Portable Water Hardness Meters

Labtron portable meters are used in quality analysis of water and other solutions. With portability, waterproof features, finds applications in indoor as well as outdoor measurement of pH, ORP, dissolved oxygen, water hardness, salinity, TDS etc.

Portable water hardness meter LPWM-A10

0.05 mmol / L - 0.2 mol / L
(CaCO₃) 0 - 19999 mg / L, (CaO) 0 - 11220 mg / L, (boiler) 0 - 400 mmol / L, (Ca) 0 - 8020 mg / L
(German degree) 0 - 1122 °dH, (English degree) 0 - 1404 °e, (French degree) 0 - 2000 °fWater hardness range
± 1 % F.S.Accuracy
2 to 5 pointsCalibration points
0.001, 0.01, 0.1 mmol / L, 0.001, 0.01, 0.1 mol / LCalibration solution