Pocket Salinity tester LPST-A10

Name: Pocket Salinity tester LPST-A10
Brand: Labtron.best
SKU: LPST-A10
Rating: 4.8 (845 reviews)

Pocket Salinity tester LPST-A10 comes with 1 - 3 point calibration system. Equipped with platinum sensor, it provides fast and reliable results. The System menu allows setting of up to 5 parameters. It measures salinity of water and other low and high salt concentrated solutions. Equipped with replaceable electrode helps to reduce the maintenance cost.

Name

Company Name

Product

Message

Captcha

Refersh

Salinity measurement range	0.00 to 10.00 ppt
Salinity accuracy	± 1 % F.S
Conductivity range	0 - 20.00, 200.0, 2000 µS/cm, 20.00 mS/cm
Calibration solutions	84 µS/cm, 1413 µS/cm, 12.88 mS/cm
Conductivity accuracy	± 1 % F.S
Calibration points	1 - 3 points
Temperature compensation range	0 °C to 60 °C, 32 °F to 140 °F
Temperature accuracy	± 1 °C
Temperature coefficient	2 % per °C
Normalization temperature	25 °C
Reset function	Yes
Cell constant	K=1
Data hold function	Manual or automatic endpoint detection
Power off	Manual or automatic (8 minute after last key is pressed)
Sensor type	Platinum sensor
Battery life	Approximately 200 hours
Power	2 × 1.5 V AAA batteries
Dimension (L × Dia.)	185 × 40 mm
Weight	100 g

- Low to high measurement range of salinity
- Equipped with platinum sensor
- 1 - 3 points push button calibration with automatic recognition of calibration solutions
- Automatic temperature compensation for accurate measured value over the entire range
- Auto hold function freezes stable, final readings for better viewing and recording
- Automatic power off helps to reduce battery power consumption
- Waterproof features guarantees protection against harsh conditions
- Battery indicator to show the remaining battery capacity
- Reset function automatically resumes all the settings to default mode
- System menu allows setting of up to 5 parameters
Pocket salinity tester measures salinity i.e. dissolved salt from pure water, brine water, aquarium water, food & beverage processing units & other industrial applications.
84 µS/cm, 1413 µS/cm, 12.88 mS/cm calibration standard solutions
AAA Batteries
Carrying case
84 µS/cm, 1413 µS/cm, 12.88 mS/cm calibration standard solutions
Platinum conductivity electrode
Pocket Salinity tester LPST-A10

Related Products of Salinity Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket Salinity tester LPST-A11

0.00 to 80.00 pptSalinity measurement range
± 1 % F.SSalinity accuracy
0 - 200.0 µS/cm, 100 - 2000 µS/cm, 20.00 mS/cmConductivity range
1413 µS/cm, 12.88 mS/cm, 111.8 mS/cmCalibration solutions

TDS Tester

Pocket TDS tester LPTS-A11

5 - 1000 ppmTDS range
± 1 % F.S.TDS accuracy
0.4 to 1.0 (default 0.5)TDS factor
1 pointCalibration points

Pocket TDS tester LPTS-A12

0.05 - 10.00 pptTDS range
± 1 % F.S.TDS accuracy
0.4 to 1.0 (default 0.5)TDS factor
1 pointCalibration points

Pocket TDS tester LPTS-A10

0.5 - 100.0 ppmTDS range
± 1 % F.S.TDS accuracy
0.4 to 1.0 (default 0.5)TDS factor
1 pointCalibration points

Online Dissolved Oxygen Controller

Online Dissolved Oxygen Controller LODC-A10

0.0 to 20.0 mg / L (or ppm)Dissolved oxygen range
1 - 2 pointsDissolved oxygen Calibration points
± 0.5 mg / LDissolved oxygen accuracy
0.1 mg / LDissolved oxygen resolution

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A12

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"Salinity range":"0.00 to 80.00 ppt, 0.00 to 42.00 psu","Salinity accuracy":"\u00b11% F.S","Salinity measurement modes":"Practical Salinity (psu) or Natural Seawater (ppt)","Salinity resolution":"0.01, 0.1, 1"}Salinity
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation

Portable Conductivity Meter LPCM-A10

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 3 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation
LinearTemperature coefficient

Portable Conductivity Meter LPCM-A11

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"TDS range":"0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS accuracy":"\u00b11 % F.S","TDS factor":"0.01 to 1.00 (Default 0.5)","TDS resolution":"0.01, 0.1, 1"}TDS
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A11

{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Multi parameter water quality analyzer LMWA-A10

{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

TSS Meter

TSS Meter LTSS-A10

20000 mg/L
0.01 mg/L ~ 45000 mg/L
0.01 mg/L ~ 120000 mg/LMeasurement range
± 2 % F.S. of its range ( Depending on the homogeneity of sludge)Measurement accuracy
≤ 0.4 MpaPressure range
≤ 2.5 m/s, 8.2 ft./sFlow rate