TSS meter LTSS-A10 is a tabletop meter with a dual-beam infrared scattered light photometer detection system for enhanced stability. Built-in self-diagnosis function to ensure data accuracy. Optional cleaning brush for automate cleansing function to reduce the sensor maintenance.
| Measurement range | 20000 mg/L <br/> 0.01 mg/L ~ 45000 mg/L <br/> 0.01 mg/L ~ 120000 mg/L |
|---|---|
| Measurement accuracy | ± 2 % F.S. of its range ( Depending on the homogeneity of sludge) |
| Pressure range | ≤ 0.4 Mpa |
| Flow rate | ≤ 2.5 m/s, 8.2 ft./s |
| Calibration | Sample calibration <br/> Slope calibration |
| Main material | SUS316L <br/> Titanium alloy marine <br/> Cover : PVC <br/> Cable : PVC |
| Power supply | 9 V ~ 36 V DC |
| Communication protocol | RS485 |
| Storage temperature | -15 °C to 65 °C |
| Measuring temperature | 0 °C to 60 °C |
| Protective rate | IP68 |
| Cable length | Standard : 10 m (maximum may be extended to 100 m) |
| Dimensions ( D x L ) | 60 mm x 256 mm |
| Weight | 1.65 kgs |
Used to check sludge concentration of technological process of sewage treatment plant, for online monitoring of industrial process water and suspended solids (sludge concentration) of waste water treatment process
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.
Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.
