Benchtop Ion meter for I, LBIM-A26

Name: Benchtop Ion meter for I, LBIM-A26
Brand: Labtron.best
SKU: LBIM-A26
Rating: 5 (932 reviews)

Benchtop Ion meter for I, LBIM-A26 comes with (I) iodide ion selective electrode for iodide ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

Name

Product

Message

Captcha

Refersh

Ion measurement range	I range: 1×10<sup>8</sup>- 1M, 0.06 -127000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	USB communication interface
Connector	BNC
Display	LCD (130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

- Large LCD display
- 2 - 5 points calibration from low to high concentration
- Direct ion concentration readout for elaborate measurement process
- Selectable concentration units from ppm, mg / L, mol / L
- mV measurements to check the performance of ion selective electrode
- Temperature compensation provides accurate reading over the entire range
- Stability indicator to show current measurement status
- Calibration due reminder for regular calibration of the meter
- Auto hold function to freeze stable reading for better viewing & recording
- Automatic electrode diagnosis shows the slope of the sensor
- Reset setting function
- Expanded memory stores and recalls up to 500 readings
- Built –in real time clock stamps
- USB communication interface to transfer stored data to PC
Benchtop Ion meter is used to measure the iodide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.
I Ion selective electrode
Temperature probe
Standard solution (1000 ppm)
Ionic strength adjuster (30 mL)
USB cable
DC 5 V Power adapter
Ion selective electrode: I range: 1×10⁸- 1M, 0.06 -127000 ppm
Ion standard solutions: 480 mL / bottle
Ionic strength adjuster: 480 mL / bottle
Temperature probe with sensor
Benchtop Ion meter for I, LBIM-A26

Related Products of Benchtop Ion Meter

Labtron benchtop meters are easy to use. The LCD display, manual or automatic mode of calibration, universal connector and other features are included in this range to produce accurate, reliable results. It consist of benchtop meter for measuring pH, conductivity, dissolved oxygen content, Ion concentration, water hardness level. These meters are suitable for simple to complex applications in water quality testing, research and analysis etc.

Benchtop Ion meter for K, LBIM-A23

K range: 1×10⁶ - 1M, 0.04 -39000 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Na, LBIM-A12

Na range: 1 × 10⁵ - 1 M, 0.1 - 23000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cl, LBIM-A10

Cl range: 5 × 10⁶ - 1 M, 1.8 - 35500 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Pb, LBIM-A25

Pb range: 1×10⁸ – 0.1M, 0.2-20700 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for S, LBIM-A24

S range: 1×10⁷ - 1M, 0.003-32100 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Ca, LBIM-A13

Ca range: 5 × 10⁷ - 1 M, 0.02 - 4000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for NH<sub>3</sub> , LBIM-A20

NH₃ range: 1 × 10⁶ - 1 M, 0.02 - 17000 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cd, LBIM-A28

Cd range: 1×10⁶– 1M, 0.01-11200 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for NH<sub>4</sub>, LBIM-A15

NH₄ range: 5 × 10⁶ – 1 M, 0.1 – 18000 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cu, LBIM-A27

Cu range: 1×10⁸ - 1M, 0.06-6400 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for F, LBIM-A11

F range: 1 × 10⁶M – saturation, 0.02 ppm to saturationIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Cn, LBIM-A21

Cn range: 5 × 10⁶ – 0.01 M, 0.2 – 260 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Br, LBIM-A14

Br range: 5 × 10⁶ - 1 M, 0.4 - 79900 ppmIon measurement range
± 0.5 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Ion meter for Ag, LBIM-A22

Ag range: 1 × 10⁷ - 1 M, 0.01 - 107900 ppmIon measurement range
± 1 % F.S.Ion measurement accuracy
0.001, 0.01, 0.1, 1Resolution
2 to 5 pointsCalibration points

Benchtop Conductivity Meter

Benchtop Conductivity Meter LBCM-A13

0.000 μS/cm to 3000mS/cmConductivity measurement range
5.00 Ω·cm to 100.0 MΩ·cmResistivity measurement range
0.000 mg/L to 1000g/LTDS measurement range
0.00 to 8.00 %Salinity measurement range

Benchtop Conductivity Meter LBCM-A14

{"Conductivity measurement range":"0.01-20.0, 200.0, 2000 \u00b5S\/cm, 20.00, 200.0 mS\/cm","Conductivity accuracy":"\u00b11% F.S.","Conductivity resolution":"0.001, 0.01, 0.1, 1","Conductivity calibration points":"1 to 3 points","Conductivity calibration solutions":"10 \u00b5S\/cm , 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm"}Conductivity Mode
{"TDS measurement Range":"0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS Accuracy":"\u00b1 1 % F.S.","TDS Factor":"0.01 to 1.00 (default 0.5)","TDS Calibration points":"3 points"}TDS Mode
{"Temperature range":"0 to 105\u00b0C, 32 to 221\u00b0F","Temperature accuracy":"\u00b11\u00b0C","Temperature resolution":"0.1\u00b0C, 0.1\u00b0F","Temperature calibration points":"1 point","Temperature Compensation Range and Mode":"Manual or Automatic, 0 to 100\u00b0C , 32 to 212\u00b0F","Temperature coefficient":"0.0 to 10.0 % per \u00b0C"}Temperature Mode
K=0.1, 1, 10Cell constant

Benchtop conductivity meter LBCM-A11

0 - 20.0, 200.0, 2000 µS / cm, 200.0 mS / cmConductivity measurement range
± 1 % F.S.Conductivity accuracy
0.01, 0.1, 1Conductivity resolution
10 µS / cm , 84 µS / cm, 1413 µS / cm, 12.88 mS / cm, 111.8 mS / cmConductivity calibration solutions

Multi Parameter Water Quality Analyzer

Multi parameter water quality analyzer LMWA-A10

{"COD determination range":"2 to 10000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 60 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 20 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Multi parameter water quality analyzer LMWA-A11

{"COD determination range":"5 to 5000 mg\/ L","COD measurement accuracy":"COD < 50 mg\/ L, \u2264 \u00b1 10 % \nand \nCOD > 50 mg\/ L, \u2264 \u00b1 5 %","COD minimum detection limit":"0.1 mg\/ L","COD measurement time":"20 minutes","COD repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric COD measurement":"Colorimetric tubes and Cuvette","COD reactor digestion temperature":"165 \u00b1 0.5\u00b0C","COD reactor digestion time":"10 min","COD reactor time setting switches":"3 pcs","Anti-chlorine interference":"(Cl) < 1000 mg\/ L No effect"}COD
{"Ammonia nitrogen determination range":"0.02 to 30 mg\/ L","Ammonia nitrogen measurement accuracy":"\u2264 \u00b1 10 %","Ammonia nitrogen minimum detection limit":"0.01 mg\/ L","Ammonia nitrogen measurement time":"10 to 15 minutes","Ammonia nitrogen repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"20 pcs","Consumables for colorimetric ammonia nitrogen measurement":"Colorimetric tubes and Cuvette","Ammonia nitrogen reactor time setting switches":"3 pcs"}Ammonia nitrogen
{"Total phosphorous determination range":"0.002 to 10 mg\/ L","Total phosphorous total phosphorous measurement accuracy":"\u2264 \u00b1 5 %","Total phosphorous minimum detection limit":"0.001 mg\/ L","Total phosphorous measurement time":"35 to 50 minutes","Total phosphorous repeatability":"\u2264 \u00b1 5 %","Processing sample number per\ufeff\ufeff\u00a0batch":"12 pcs","Consumables for colorimetric total phosphorous measurement":"Colorimetric tubes and Cuvette","Total phosphorous reactor digestion temperature":"120 \u00b1 0.5\u00b0C","Total phosphorous reactor digestion time":"30 min","Total phosphorous reactor time setting switches":"3 pcs"}Total phosphorous
{"Turbidity determination range":"0.5 to 400 NTU","Turbidity measurement accuracy":"\u2264 \u00b1 5 %","Turbidity minimum detection limit":"0.1 NTU","Turbidity measurement time":"1 minute","Turbidity repeatability":"\u2264 \u00b1 5 %","Consumables for colorimetric turbidity measurement":"Colorimetric Cuvette"}Turbidity

Benchtop Multi-parameter Water Quality Meter

Benchtop Multi-parameter Water Quality Meter LMPWM-A31

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

TDS Mode

Benchtop Multi-parameter Water Quality Meter LMPWM-A32

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode

Dissolved Oxygen Range	0.00 to 20.00 mg/ L
Dissolved Oxygen Accuracy	± 0.2 mg/ L
Dissolved Oxygen Resolution	0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points	1 or 2 Points
% Saturation Range	0.0 to 200.0 % with ± 2 % accuracy
Pressure correction	60 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 to 50 g/ L

Dissolved Oxygen Mode

Benchtop Multi-parameter Water Quality Meter LMPWM-A30

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode