Type III Water Purification System LHWP-A13 is a modular design which meets the needs of basic laboratory water purifier. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. These systems produce and reject water at the same time .Equipped with easy replaceable filters. It’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
| Output of Pure water | ≥ 40 L / hr. |
|---|---|
| Water Type | Type III |
| Configuration | Floor Standing |
| Process | Single Pass RO system |
| Water intake flowrate | ≥ 1- 1.5 L / min |
| Conductivity at 25 °C | < 10 µs / cm |
| pH | 5.0 – 7.5 |
| Oxidizabes | ≤ 0.4 mg / L |
| Evaporation residue | ≤ 2.0 mg / L |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 200 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 30 kg |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
