Type III Water Purification System LHWP-B11 is a revolutionary, modular design which helps in elimination of large amount of salts and other minerals from water using 2 stages of RO. It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s. Equipped with easy replaceable filters, it’s designed to deliver compliant purified water with clear quality parameters and care free maintenance
| Output of Pure water | ≥ 20 L / hr. |
|---|---|
| Water Type | Type III |
| Configuration | Benchtop |
| Process | Double Pass RO system |
| Water intake flowrate | ≥ 1- 1.5 L / min |
| Conductivity at 25 °C | < 5 µs / cm |
| pH | 5.0 – 7.5 |
| Oxidizabes | ≤ 0.4 mg / L |
| Evaporation residue | ≤ 2.0 mg / L |
| Electrical requirements | 220 V / 50 Hz |
| Power | ≥ 200 W |
| Dimensions ( L x W x H ) | 340 x 550 x 530 mm |
| Weight | 35 kg |
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
