Water Purification System LWPS-A10

Water Purification System LWPS-A10 is a Type I water treatment system and the feed water is RO or distilled water. It mainly consists of pretreatment system, RO system, ultrapure water system conveying unit and control system. It consists of 254 nm UV lamp to remove the bacteria in the system and 185nm UV lamp to reduce TOC. Fully automatic control over the whole process, e.g. automatic water preparation, when water tank is full, automatically stop the system and cut off the power and water. Built-in RO membrane timing automatic flush procedures, and manual RO membrane cleaning button is available.

  • Water quality One stage (Type I)
    Feed water RO water /Distilled water<hr> Water temperature: 5 ~ 40℃
    Conectivity
    Resistivity 18.25 MΩ.cm @ 25 ℃
    TOC < 5ppb
    Bacteria < 0.1 cfu/ml
    Endotoxin < 0.001 EU/ml
    Particle ( > 0.22μm) <1/ml
    Absorbance (254nm,1cm optical distance) < 0.001 EU/ml
    Reactive Silica(SiO2) < 0.01 ppm
    RNases < 0.01 ng/ml
    DNases < 4 pg/μl
    Temperature 5 ℃ ~ 40 ℃
    Humidity 10 % ~ 80 %
    Water production rate Type 1 water flow rate: 1-1.5 L/min
    Micro filtration Millipore Millipak 0.22μm membrane or hollowed fiber membrane filter
    Power supply 230 V/50 Hz 150 W
    Main body Dimension (L × W × H) 340 × 550 × 530 mm (bench type)
    • Millipore BioPak UF membrane to reduce the pyrogen, RNase, DNase
    • Ultra-purification system: Millipore ion exchange resin cartridge and special flow design, high ultra-purify efficiency
    • Effectively remove the trace ions in water; guarantee the stability of water quality
    • Micro filtration: Making the particles content (larger than 0.22μm) is <1/ml and bacteria less than 0.1CFU/ml
    • Built-in manual water cycling program and ultrapure water auto-cycle program to keep the water quality of ultrapure water
    • Water resistance on-line monitoring, realizing man-machine conversation
    • System can be installed on the lab bench
    • 30L PE water reservoir with vent valve
  • Used for Medical device injection to human body, DNA/RHA preparation, DNA testing, HPLC (test and analysis of amino acid, penicillin; Organic ingredients), GCMS, ICP, IC, gas chromatography, AAS etc.

Water Purification System LWPS-C10

  • 90 liters/hourOutput 2nd stage RO water
  • Up to 2 liters/minute (when tank is full)Output ultrapure water
  • Resistivity (25°C) 18.2 M Ω cm
    TOC: < 3ppb
    Bacteria: <0.1 cfu/ml
    Particle (>0.2 µm): <1/ml
    Endotoxin: <0.001EU/ml
    RNases: <1pg/ml
    DNases: <5pg/ml
    Ultrapure Water Quality
  • Conductivity 1st stage RO water: Feed water Conductivity ×5 %
    Conductivity 2nd stage RO water: 1 to 5 µs/cm
    RO Water Quality

Water Purification System LWPS-A11

  • Two stage(Type III and type I)Water quality
  • Tap waterTDS≤400ppm
    Water temperature: 5-40℃
    Type 3 water ≥10L/h
    Feed water
  • <5 μs/cm@25℃Conectivity
  • 18.25 MΩ.cm @ 25 ℃Resistivity

Water Purification System LWPS-C11

  • 90 liters/hourOutput 2nd stage RO water
  • Up to 2 liters/minute (when tank is full)Output ultrapure water
  • Resistivity (25°C) 18.2 M Ω cm
    TOC: < 3ppb
    Bacteria: <0.1 cfu/ml
    Particle (>0.2 µm): <1/ml
    Endotoxin: <0.001EU/ml
    RNases: <1pg/ml
    DNases: <5pg/ml
    Ultrapure Water Quality
  • Resistivity >10.2 M Ω cm
    TOC: < 30ppb
    Silicone rejection rate: >99.9 %
    EDI

Radio Frequency Identification Water Purification System

Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier

Radio Frequency Identification Water Purification System LRFW-B11

  • ≥ 20 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity

Radio Frequency Identification Water Purification System LRFW-B10

  • ≥ 10 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity
Radio Frequency Identification Water Purification System LRFW-B12
  • ≥ 30 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity

Type I and Type III Water Purification System

This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle

Type I and Type III RO Water Purification System LOTW-B10
  • ≥ 10 L / hr.Output of Pure water
  • Type I and Type IIIWater Type
  • 30 LWater Tank capacity
  • BenchtopConfiguration

Type I and Type III RO Water Purification System LOTW-B12

  • ≥ 30 L / hr.Output of Pure water
  • Type I and Type IIIWater Type
  • 30 LWater Tank capacity
  • BenchtopConfiguration

Type I and Type III RO Water Purification System LOTW-B11

  • ≥ 20 L / hr.Output of Pure water
  • Type I and Type IIIWater Type
  • 30 LWater Tank capacity
  • BenchtopConfiguration

Type III Water Purification System

It provides Type III level water which is required for chemical and physical inspection or for washing lab glassware’s

Type III Water Purification System LHWP-B12
  • ≥ 30 L / hr.Output of Pure water
  • Type IIIWater Type
  • BenchtopConfiguration
  • Double Pass RO systemProcess
Type III Water Purification System LHWP-B11
  • ≥ 20 L / hr.Output of Pure water
  • Type IIIWater Type
  • BenchtopConfiguration
  • Double Pass RO systemProcess

Type III Water Purification System LHWP-B10

  • ≥ 10 L / hr.Output of Pure water
  • Type IIIWater Type
  • BenchtopConfiguration
  • Double Pass RO systemProcess

Deionized Water System LDIN-A20

  • 30 liters/hourOutput
  • Up to 2 liters/minute (with pressure tank)Flow rate
  • 2 reverse osmosis water, deionized waterPure water outlet
  • Resistivity: 16 to 18.2 M Ω cm
    Bacteria: N/A
    Particle (>0.1 µm): N/A
    Deionized Water Quality
Deionized Water System LDIN-A10
  • 30 liters/hourOutput
  • Up to 2 liters/minute (with pressure tank)Flow rate
  • 2 reverse osmosis water, deionized waterPure water outlet
  • Resistivity: 16 to 18.2 M Ω cm
    Bacteria: N/A
    Particle (>0.1 µm): N/A
    Deionized Water Quality

UV Water Purification System

UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption

UV Water Purification System LUVW-B12
  • ≥ 30 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity

UV Water Purification System LUVW-B10

  • ≥ 10 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity

UV Water Purification System LUVW-B11

  • ≥ 20 L / hr.Output of Pure water
  • Double Pass RO systemProcess
  • BenchtopConfiguration
  • 30 LWater Tank capacity