Type I and Type III RO Water Purification System LOTW-B20 is a unit which delivers primary grade water as well as ultra-pure water and has 30 L/hr standard flow rate. Meets the standards of ASTM, CAP and NCCLS. Features like built-in RO membrane antiscalant, ultra purification cartridge, online-monitoring of water resistance, manual water cycling program etc. ensures consistent quality of water. The unit composes of pre-treatment system, RO membrane, Water pump and ultra-purification system. It is majorly required in analytical labs.
| Water production rate | ≥ 30 L/h |
|---|---|
| Water intake rate | 1.5 to 1.8 L/min |
| Temperature | 5 to 40°C |
| Humidity | 10% to 80% |
| Feed water | Tap water: 0.15 to 0.4 MPa<br/> TDS ≤ 400 ppm<br/> Water temperature: 5 to 40°C |
| Water quality | Resistivity: 18.25 MΩ.cm at 25°C<br/> Conductivity: 0.055 μS/cm at 25°C<br/> Meets ASTM, CAP, NCCLS specifications |
| Retention rate of silicon | > 99.9 % |
| TOC | < 20 ppb |
| Particle (> 0.22 μm) | < 2 /ml |
| Absorbance (254 nm, 1cm optical distance) | < 0.001 |
| Reactive Silica (SiO<sub>2</sub>) | < 0.01 ppm |
| Heavy metal | < 0.01 ppm |
| Power supply | 220 V/50 Hz 450 W |
| Dimension (L×W×H) | 490×550×850 mm |
It used to obtain ultra-pure water which is required in pharmaceutical, microbiology, genetic, optical, electronics, medical etc. processes.
| Equipment No. | Equipment Name | Lifespan | Qty |
| 1 | 1st stage PP filter-20 inch | 3months | 1 pcs |
| 2 | 2nd stage carbon filter-20 inch | 6months | 1pcs |
| 3 | 4th stage PP filter -20 inch | 10-12 months | 1pcs |
| 4 | RO membrane | 1years | 3pcs |
| 5 | Ultra Purification resin column | 1 year | 2pcs |
| 6 | Ultra Purification resin cartridge | 1 year | 1pcs |
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
UV water purification systems destroy the DNA of micro-organisms making the water contamination free. Water produced from UV water purification is contamination free water which is potable for consumption
Radio Frequency Identification Water Purifier are equipped with a RFID Radio Frequency Identification Chip which helps keeping a check on the quality of water in real time. This helps in monitoring of parameters for the purifier
This water purification system is a combinational system that produces Type III water after RO and Type I water after deionization in one cycle
This water purification system provides Type II level water with consistency and reliability. It removes approximately 98% of inorganic ions and 99 % of all dissolved organic substances
