Online pH Controller LOPC-A10

Name: Online pH Controller LOPC-A10
Brand: Labtron.best
SKU: LOPC-A10
Rating: 4.8 (768 reviews)

Online pH Controller LOPC-A10 features 1 to 3 points pH calibration system, and 4 to 20 mA output signal transmitter. The large and clear back light LCD displays Calibration and setup values, temperature values, ATC (automatic temperature compensation) values, high and low limit of measurement. The automatic electrode slope display helps user decide when to replace the sensor.

Name

Company Name

Product

Message

Captcha

Refersh

pH measurement range	01.00 to 15.00 pH
pH calibration points	1 to 3 points
pH Buffer Solutions	USA (pH 4.01, 7.00, 10.01) or NIST (pH 4.01, 6.86, 9.18)
pH accuracy	± 0.01 pH
pH resolution	0.01 pH
mV measurement range	-1000 to 1000 mV
mV accuracy	± 1 mV
mV resolution	1 mV
Temperature range	0 to 100°C , 32 to 212°F
Temperature calibration points	1 point
Temperature calibration range	± 10°C
Temperature accuracy	± 1°C
Temperature resolution	0.1°C
Signal output	4 to 20 mA
Load	Max 500
Low and high alarm limits	1.00 to 10.00 pH, selectable
Connection Interface	RS485
Connection Terminals	Detectable screw terminals
Temperature compensation	Automatic, 0 to 100°C , 32 to 212°F
Environmental conditions	Ambient temperature to ≤ 60°C, RH ≤ 80%
Display	LCD
Power	DC 24 V
Dimension (LWH)	96 × 96 × 75 mm
Weight	350 g

- Equipped with industrial pH electrode
- 1 to 3 pH calibration points with ‘Automatic buffer recognition’
- ATC mode for accurate readings over entire range
- Low high alarm limits set automatically activate an external device
- Selectable temperature units °C or °F for diff. applications
- System menu allows setting of up to 9 parameters
- Reset features to resumes all setting back to default
- Manual temperature calibration improves accuracy
Used to measure pH in waste water treatment and quality inspection plants, filtration systems, RO treatment water plants, Agriculture, Aquaculture, and research industry.
Accessories No. Name Qty.

1 Industrial pH electrode 1

2 pH buffer pouches (pH 4.01, 7.00, 10.01) 1
Online pH Controller LOPC-A10

Portable Conductivity Meter

Portable Conductivity Meter LPCM-A11

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"TDS range":"0 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)","TDS accuracy":"\u00b11 % F.S","TDS factor":"0.01 to 1.00 (Default 0.5)","TDS resolution":"0.01, 0.1, 1"}TDS
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation

Portable Conductivity Meter LPCM-A12

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 5 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"Salinity range":"0.00 to 80.00 ppt, 0.00 to 42.00 psu","Salinity accuracy":"\u00b11% F.S","Salinity measurement modes":"Practical Salinity (psu) or Natural Seawater (ppt)","Salinity resolution":"0.01, 0.1, 1"}Salinity
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation

Portable Conductivity Meter LPCM-A10

{"Conductivity measurement range":"0.01 to 20.00, 200.0, 2000 \u00b5S\/cm, 20.00, 200 mS\/cm","Conductivity accuracy":"\u00b10.5% F.S","Conductivity calibration points":"1 to 3 points","Conductivity calibration solutions":"10 \u00b5S\/cm, 84 \u00b5S\/cm, 1413 \u00b5S\/cm, 12.88 mS\/cm, 111.8 mS\/cm or Custom","Conductivity resolution":"0.001, 0.01, 0.1, 1"}Conductivity
{"Temperature measuring range":"0 105 \u00b0C, 32 to 221 \u00b0F","Temperature measuring accuracy":"\u00b1 \u00b00.5 C, \u00b1 0.9 \u00b0F","Temperature calibration points":"1 point","Temperature resolution":"0.1 \u00b0C, 0.1 \u00b0F"}Temperature
0 to 100 °C, 32 to 212 ° F, Manual or AutomaticTemperature compensation
LinearTemperature coefficient

pH Tester

Labtron pocket testers are small and compact in size, gives fast and accurate results. The Pocket testers consist of pH, ORP, TDS, dissolved oxygen, salinity and conductivity tester for various laboratory as well as outdoor applications. Measurements can be taken by inserting the probe in to the test solution and after gentle stirring, stable readings can be noted down.

Pocket pH tester LPPT-A11

0.0 - 14.00 pHpH measurement range
Flat pH electrodeShape of electrode
± 0.1 pHpH measurement accuracy
2 pointsCalibration point

Pocket pH tester LPPT-A12

0.0 - 14.00 pHpH measurement range
Long distance planar pH electrodeShape of electrode
± 0.1 pHpH measurement accuracy
2 pointsCalibration point

Pocket pH tester LPPT-A10

0.0 - 14.00 pHpH measurement range
Round glass pH electrodeShape of electrode
± 0.1 pHpH measurement accuracy
2 pointsCalibration point

Benchtop Multi-parameter Water Quality Meter

Benchtop Multi-parameter Water Quality Meter LMPWM-A30

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

TDS Mode

Benchtop Multi-parameter Water Quality Meter LMPWM-A31

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode

TDS Range	0 to 10.00, 100.0, 1000 ppm, 10.00, 100 ppt (Max. 200 ppt)
TDS Accuracy	± 1 % F.S.
TDS Factor	0.1 to 1.0 (default 0.5)

TDS Mode

Benchtop Multi-parameter Water Quality Meter LMPWM-A32

pH range	-2.00 to 20.00 pH
pH Accuracy	± 0.002 pH
pH Resolution	0.1/0.01/0.001 pH, selectable
pH Calibration Points	1 to 5 Points
pH Buffer Solutions	USA (pH 4.0/7.00/10.01) or NIST (pH 4.01/6.86/9.18) or DIN buffers

pH Mode

mV Range	-1999.9 to 1999.9 mV
mV Accuracy	± 0.2 mV
mV Resolution	0.1/1 mV, selectable
mV Calibration Points	1 Point

mV Mode

Conductivity Range	0.01 to 20.00, 200.0, 2000 µS/cm, 20.00, 200.0 mS/cm
Conductivity Accuracy	± 0.5% F.S.
Conductivity Resolution	0.01/0.1/1
Conductivity Calibration Points	1 to 5 Points
Conductivity Solutions	10, 84, 1413 µS/cm, 12.88, 111.8 mS/ cm
Conductivity Temperature coefficient	0.0 to 10.0 %/°C
Compensation mode	Linear or Pure Water
Cell Constant	K=0.1, 1, 10 or Custom
Reference temperature	20 or 25°C

Conductivity Mode

Dissolved Oxygen Range	0.00 to 20.00 mg/ L
Dissolved Oxygen Accuracy	± 0.2 mg/ L
Dissolved Oxygen Resolution	0.1/ 0.01 mg/ L, selectable
Dissolved Oxygen Calibration Points	1 or 2 Points
% Saturation Range	0.0 to 200.0 % with ± 2 % accuracy
Pressure correction	60 to 112.5 kPa, 450 to 850 mmHg
Salinity correction	0 to 50 g/ L

Dissolved Oxygen Mode

Portable Chlorine Meter

Portable Chlorine Meter LPCL-A10

{"Range":"0.00 to 5.00 mg\/L","Accuracy":"0.001 mg\/L 0.001 ABS","Repeatability Lower detection limit":"\u22640.02 mg\/L"}Residual chlorine/total chlorine
{"Range":"0.00 to 10.00 mg\/L","Resolution":"0.001 mg\/L 0.001 ABS","Accuracy":"\u22642 mg\/L: \u00b10.10 mg\/L \u02c32 mg\/L: \u00b15 %","Lower detection limit":"\u22640.04 mg\/L"}Chlorine dioxide
LEDLight source
515 nmWavelength of light

TSS Meter

TSS Meter LTSS-A10

20000 mg/L
0.01 mg/L ~ 45000 mg/L
0.01 mg/L ~ 120000 mg/LMeasurement range
± 2 % F.S. of its range ( Depending on the homogeneity of sludge)Measurement accuracy
≤ 0.4 MpaPressure range
≤ 2.5 m/s, 8.2 ft./sFlow rate

Accessories No.	Name	Qty.
1	Industrial pH electrode	1
2	pH buffer pouches (pH 4.01, 7.00, 10.01)	1