Lubricating Oil Rust Characteristics Tester LRCT-A11 is designed and made as per the International Standard ASTM D665 - IP135. (Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water).
| Sample hole | 4 pieces |
|---|---|
| Speed of stirring motor | 1400 rpm |
| Speed for sample stirring | 1000 ± 50 rpm |
| Ambient temperature | Room temperature to 35°C |
| Temperature controlling range | 0 to 100°C |
| Temperature controlling accuracy | ± 1°C |
| Temperature controller | Pt100 |
| Relative humidity | ≤ 85 % |
| Timing range | 1 min to 24 hours |
| Heating power | 600 W for temperature controlling; 1000 W for auxiliary heating |
| Total power consumption | ≤ 1800 W |
| Dimensions | 880 × 430 × 840 mm |
| Power supply | AC 220 V ± 10%, 50Hz |
It is also suitable to determine rust-preventing characteristics of other oils, such as hydraulic pressure oil, circulation oil, as well as liquids heavier, whose gravity is greater than water.
