info@labtron.best
+44 2080 043 608
Labtron Equipment Ltd
Portable Incubator LPI-A10

Portable Incubator LPI-A10

Portable Incubator LPI-A10 is a compact, small and lightweight unit featured with PID microprocessor controller technology that adopts easy operation system and improves work efficiency. It works in ambient temperature range of +5 to 50°C and has 8 L volume capacity with gravity air convection type of circulation. This handy incubator is primarily designed for various outdoor working environment for microbial cultivation and heated storage.

  • Air cycle Mode Gravity air convection
    Function
    • Temperature range: RT +5 to 50 ℃
    • Temperature resolution ratio: 0.1 ℃
    • Temperature motion: ± 0.5 ℃
    • Temperature uniformity: ± 1.5 ℃
    Body structure
    • Inner chamber: Mirror stainless steel
    • Outer shell: Cold rolling steel electrostatic spraying exterior
    • Insulation layer: 6.5 cm polyurethane interlayer
    • Heater: Nickel and chromium alloy heating wire
    Controller
    • Temperature controller: PID Intelligent
    • Temperature setting mode: Touch button setting
    • Display mode: LED
    • Time setting range: 0 to 9999 min
    • Operation function: Fixed temperature operation, Timing function, Auto stop
    • Additional function: Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory
    • Sensor: CU50
    Safety Device Over temperature sound-light alarm
    Technical specification
    • Inner chamber dimension (W × L × H): 200 × 160 × 230 mm
    • Exterior dimension (W × L × H): 300 × 330 × 330 mm
    • Packing dimension (W × L × H): 340 × 370 × 390 mm
    • Volume: 8 L
    • Power consumption: 300 W
    • Power supply: AC 220 V; 50/60 Hz, 1.3 A
    • Net weight: 9 kg
    • Gross weight: 11 kg
    • Working temperature range of RT +5 to 50 ℃ and gravity air convection type of circulation
      Compact, portable and stackable design saves bench space
    • Carrying strap provides easy transport of samples
    • PID microprocessor controller with 0.5 °C control sensitivity
    • LED display with accuracy of 0.1 °C for precise temperature monitoring
    • Constant time setting function for personalized culture experiment requirement
    • Side door opening (180°) and seal connector for easy loading of samples inhibits cross contamination
    • Automatic rectification in case of temperature sensor deviation
    • Audible and visual alarm system protection for over temperature
    • Auto circuit breaker function protects unit from power surges
    • Mirror stainless steel exterior with curved angle design for easy maintenance
    • Cold-rolled rugged steel with anti-bacterial powder coating resists dents, cracks, and chemical attack

  • Ideal incubator for basic incubation and heated storage applications. Used in industrial, mining establishments, medical, sanitary field, biochemistry and agricultural science field for laboratory cultivation of bacterial culture, breeding and ferment.

  • Accessories no Accessories name
    1.        Vehicular supply / DC 12 V supply
  • Portable Incubator LPI-A10

Related Products of Portable Incubator

Portable Incubator LPI-A11

Portable Incubator LPI-A11
  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 80 \u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller
Portable Incubator LPI-A12

Portable Incubator LPI-A12
  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 250\u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller

Portable Incubator

Portable Incubator : Portable Incubator LPI-A11

Portable Incubator LPI-A11
  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 80 \u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller
Portable Incubator : Portable Incubator LPI-A10

Portable Incubator LPI-A10
  • Gravity air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 50 \u2103","Temperature resolution ratio":"0.1 \u2103","Temperature motion":"\u00b1 0.5 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Mirror stainless steel","Outer shell":"Cold rolling steel electrostatic spraying exterior","Insulation layer":"6.5 cm polyurethane interlayer","Heater":"Nickel and chromium alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"CU50"}Controller
Portable Incubator : Portable Incubator LPI-A12
Portable Incubator LPI-A12
  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 250\u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller

Anaerobic Incubator

Anaerobic Incubator : Anaerobic Incubator LAI-B10
Anaerobic Incubator LAI-B10
  • < 5 minTime for creating anaerobic state in sample chamber
  • < 1 hour (Oxygen concentration ≤ 1 %)Time for creating anaerobic state in operation chamber
  • > 12 h (when no supply of mixed gas)Anaerobic environment maintenance time
  • RT + 3°C to 60°CRange of temperature control in incubation chamber
Anaerobic Incubator : Anaerobic Incubator LAI-A10

Anaerobic Incubator LAI-A10
  • Microcomputer control systemControl System
  • LCD display with button-press keypadDisplay
  • < 5 minutesTime for creating anaerobic state in sample chamber
  • < 1hrTime for creating anaerobic state in operation chamber
Anaerobic Incubator : Anaerobic Incubator LAI-A11

Anaerobic Incubator LAI-A11
  • Microprocessor control system + Siemens PLCControl System
  • LCD display with touch screen control panelDisplay
  • < 5 minutesTime for creating anaerobic state in sample chamber
  • < 1 hrTime for creating anaerobic state in operation chamber

Lighting Incubator

Lighting Incubator : Lighting Incubator LLI-A11
Lighting Incubator LLI-A11
  • 350 LCapacity
  • 2 side illuminationIllumination type
  • Fluorescent lampLight source
  • 0 to 15000 lxLighting illumination
Lighting Incubator : Lighting Incubator LLI-A10
Lighting Incubator LLI-A10
  • 250 LCapacity
  • 2 side illuminationIllumination type
  • Fluorescent lampLight source
  • 0 to 12000 lxLighting illumination
Lighting Incubator : Lighting Incubator LLI-A12

Lighting Incubator LLI-A12
  • 450 LCapacity
  • 2 side illuminationIllumination type
  • Fluorescent lampLight source
  • 0 to 20000 lxLighting illumination

Roller Bottle Incubator

Roller Bottle Incubator : Roller Bottle Incubator LRBI-A10

Roller Bottle Incubator LRBI-A10
  • 5 to 60°CTemperature range
  • ±0.5°C (ambient temperature 25°C, set value 37°C, 5 % no load)Temperature uniformity
  • ±0.2°C (ambient temperature 25°C, set value 37°C, 5 % no load)Temperature fluctuation
  • 0 to 20 %CO2 Concentration range

Cooling Incubator

This wide range of cooling incubators is available in different temperature ranges and it is suitable to serve for preservation of culture medium, serum, medicine as well as micro-organism training and environmental testing, etc.

Cooling Incubator : Cooling Incubator LCOI-A12
Cooling Incubator LCOI-A12
  • 3(pcs)Shelves
  • 0.1 ℃Display Resolution
  • (-40) ℃ ~ 65 ℃Temperature Range
  • High: ± 0.5 ℃ Low: ± 1 ℃Temperature Stability
Cooling Incubator : Cooling Incubator LCOI-A11
Cooling Incubator LCOI-A11
  • 3(pcs)Shelves
  • 0.1 ℃Display Resolution
  • (-20) ℃ ~ 65 ℃Temperature Range
  • High: ± 0.5 ℃ Low: ± 1 ℃Temperature Stability
Cooling Incubator : Cooling Incubator LCOI-A10

Cooling Incubator LCOI-A10
  • 3(pcs)Shelves
  • 0.1 ℃Display Resolution
  • (-10) ℃ ~ 65 ℃Temperature Range
  • High: ± 0.5 ℃ Low: ± 1 ℃Temperature Stability