Drosophila Incubator LDRI-A10

Drosophila Incubator LDRI-A10 is a floor type incubator with 3 side LED illumination system. Heavy-duty 3 pcs shelves have 250 L capacity. Lighting illumination of 0 to 12000 lx provides ideal environment for Drosophila melanogaster husbandry (culturing). It includes an RS485 output and an independent over-temperature thermostat and over-temperature alarm.

  • Capacity 250 L
    Illumination type 3-side illumination
    Illumination source Fluorescent lamp
    Lighting illumination 0 to 12000 lx
    Lighting Illumination Control 6 degree relative illumination control
    Temperature range With illumination: 10 to 50℃, Without illumination: 4 to 50℃
    Temperature resolution 0.1℃
    Temperature accuracy ± 1℃
    Temperature uniformity ± 1℃
    Humidity range 50 to 90 % RH
    Humidity fluctuation ± 5 to 7 % RH
    Continuous working time ≥ 180 h
    Ambient temperature 5 to 35 ℃
    Number of shelves 3 pcs
    Standard interface RS485 for PC series
    Internal construction Painted stainless steel
    Maximum power consumption 890 W
    Power supply AC 220 V ± 10 %, 50 Hz
    Internal dimension (W×D×H) 555 × 450 ×1100 mm
    External dimension (W×D×H) 680 × 680 × 1760 mm
    Packaging dimension (W×D×H) 810 × 820 × 1890 mm
    Gross weight 150 kg
    • Designed specifically for Drosophila research
    • Operates within temperature range preferred by fruit flies typically 5 to 35°C
    • Program temperature and light cycles reproduces diurnal cycles that foster breeding
    • Mechanical convection provides temperature uniformity and effective space utilization
    • Units are easy to clean and corrosion resistant painted stainless steel interiors
    • Floor designed compressor with non-vibrational body
    • Breeze circulation ensures uniform air distribution throughout chamber
    • Standard RS485 interface and independent over-temperature thermostat with alarm
  • Drosophila Incubators are designed specifically for rearing flies and other insects which are used in genetic studies, offering exceptional temperature, humidity and lighting control for active experimentation or housing stocks.

  • Accessories no Accessories name
    1.        RS485 interface for PC series

Drosophila Incubator LDRI-A11

  • 350 LCapacity
  • 3-side illuminationIllumination type
  • Fluorescent lampIllumination source
  • 0 to 20000 lxLighting illumination

Drosophila Incubator LDRI-A12

  • 450 LCapacity
  • 3-side illuminationIllumination type
  • Fluorescent lampIllumination source
  • 0 to 20000 lxLighting illumination

Heating Incubator

Equipped with inner glass door for easy operation, our heating incubators deliver a higher level of performance for storage and cultivation purpose. This range is available in different chamber volume.

Heating Incubator LHI-A11

  • 35 LChamber Volume
  • 2 (pcs)Shelves
  • 0.1 ℃ / ± 0.5 ℃Display Resolution
  • RT 5 ℃ ~ 65 ℃Temperature Range

Heating Incubator LHI-A12

  • 50 LChamber Volume
  • 2 (pcs)Shelves
  • 0.1 ℃ / ± 0.5 ℃Display Resolution
  • RT 5 ℃ ~ 65 ℃Temperature Range
Heating Incubator LHI-A10
  • 16 LChamber Volume
  • 2 (pcs)Shelves
  • 0.1 ℃ / ± 0.5 ℃Display Resolution
  • RT 5 ℃ ~ 65 ℃Temperature Range
Gel Card Incubator LIGC-A10
  • 24 cardsCapacity
  • RT+5°C to 60°CTemperature range
  • ± 0.5°CTemperature accuracy
  • 0.1°CTemperature precision

Portable Incubator LPI-A10

  • Gravity air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 50 \u2103","Temperature resolution ratio":"0.1 \u2103","Temperature motion":"\u00b1 0.5 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Mirror stainless steel","Outer shell":"Cold rolling steel electrostatic spraying exterior","Insulation layer":"6.5 cm polyurethane interlayer","Heater":"Nickel and chromium alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"CU50"}Controller

Portable Incubator LPI-A12

  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 250\u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller
Portable Incubator LPI-A11
  • Natural air convectionAir cycle Mode
  • {"Temperature range":"RT +5 to 80 \u2103","Temperature resolution ratio":"1 \u2103","Temperature motion":"\u00b1 1.0 \u2103","Temperature uniformity":"\u00b1 1.5 \u2103"}Function
  • {"Inner chamber":"Stainless steel","Outer shell":"Galvanized steel","Insulation layer":"Polyurethane interlayer","Heater":"Explosion proof alloy heating wire"}Body structure
  • {"Temperature controller":"PID Intelligent","Temperature setting mode":"Touch button setting","Display mode":"HD bright LED","Time setting range":"0 to 9999 min","Operation function":"Fixed temperature operation, Timing function, Auto stop","Additional function":"Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory","Sensor":"Temperature and humidity sensor"}Controller

Shaking Incubator

It incorporates advantage of both closed and shaking incubation required for no. of processes which includes tissue culture, enzyme reaction, fermentation etc. It is highly efficient with user-friendly operation.

Shaking Incubator (Stack Type) LSI-D10
  • LCDDisplay
  • Forced convectionCirculation Mode
  • Rotatory ShakingShaking Mode
  • Unishaft driveDrive Mode

Shaking Incubator (Stack Type) LSI-D11

  • LCDDisplay
  • Forced convectionCirculation Mode
  • Rotatory ShakingShaking Mode
  • Unishaft driveDrive Mode

Shaking Incubator LSI-A10

  • 40 to 300 rpmShaking Speed Range
  • 280 × 220 mmPlatform Size
  • 0.1 ℃Display Resolution
  • Room temperature +5 ℃ to 50 ℃Temperature Range
Dry bath incubator LDBI-A10
  • RT. 5°C ~ 160°CTemperature range
  • ± 0.5 °C at 40 °C ; ± 1 °C at 120°CTemperature accuracy
  • ± 0.5 °CTemperature uniformity
  • 1 or 2Block quantity
Dry bath incubator LDBI-A20
  • RT. 5°C ~ 100°CTemperature range
  • ≤ ± 0.3°CTemperature accuracy
  • ≤ ± 0.3 °CTemperature uniformity
  • ± 0.3°CTemperature stability

Dry bath incubator LDBI-A11

  • RT. 5°C ~ 130°CTemperature range
  • ± 0.5 °C at 40 °C ; ± 1 °C at 120°CTemperature accuracy
  • ± 0.5 °CTemperature uniformity
  • 4Block quantity