X-Ray Film Processor LXFP-A10 is small footprint and light weight device and the volume of the developer and the fixer is only 5.5 L, which can reduce the chemical renewal period and keep the chemical in a good active condition. It offers replenishment container of 25 L and 90 to 160 s processing time. Designed with microprocessor temperature and speed controller. Lower costs for water and chemicals consumption with high efficiency and maximum energy.
| Film format | 3 × 6 inches 14 × 17 inches ( Max film Width 356 mm) |
|---|---|
| Film applicable | X-ray, MRI and CT etc. |
| Process time | 90 to 160 s |
| Time of develop | 25 s to 45 s |
| Capacity (Dev time 25 S) | 14 × 17 inches 75 pcs/hour, 10 × 12 : 135 pcs/hour, 4 × 4 inches 970 pcs (in theory) |
| Adjustable Dev./Fix temperature range | 20˚C to 40˚C |
| Adjustable dryer temperature range | 40˚C to 65˚C |
| Adjustable range of repl. | 20 to 200 ml |
| Chemical replenish mode | Automatic/Manual/Continuous replenish during processing Automatic: replenish one time when each X-ray film is processed |
| Tank volume | Develop: 5.5 L and FIX: 5.5L |
| Replenishment containers | 25 L |
| Anti- crystallization | In 4 min intervals |
| Water consumptions | 21/min during processing 0L/min during stand by |
| Water pipe dimension | D= 15 mm |
| Process producer | Develop-Fixer-Washer-Dryer |
| Ambient temperature | -40˚C to 70˚C |
| Relative humidity | 10% to 100% |
| Ambient air pressure | 500 to 1060 hpa |
| Dimension | 865 × 585 × 520 mm |
| Power consumption | 2.64 kW |
| Current | |
| Power supply | 220 V AC to 240 VAC, 50/60Hz |
| Weight | 57 kg |
X-Ray Film Processor is used for automatic film processing, analysis of samples across hospitals, clinics, radiography centers, orthopedic centers, and forensic departments.
