Electronic Wood Density Meter LWDM-A11 is robust and compact design device. It offers 0 .001 to 150 g weighing range and 10 seconds testing time. Designed with LCD display to observe density, volume, water absorption, porosity and Offers direct reading. It adopt non-absorbent wood products, density and volume of the products can be showed direct. It is used in Boiling method, vacuum saturation method and applied for testing the basic density, bulk , wet, apparent density, apparent porosity, water absorption, volume of open pores and closed pores, total porosity of wood For testing air-dried density of wood in laboratory and production environments.
| Weighing range | 0 .001 to 150 g |
|---|---|
| Minimum sample weight | 5 g |
| Maximum weighing capacity | 150 g |
| Water absorption and porosity | 0.0001 |
| Density resolution | 0.001g/cm<sup>3</sup> |
| Built-in weighing sensor | German HBM |
| A cage for floating objects | Yes |
| Function of solution compensation | Yes |
| Either water or liquid can be used as medium | Yes |
| Rechargeable batteries | NA |
| Wind-proof outer cover | Yes |
| Standard interface | RS-232 |
| Testing time | 10 seconds |
| Temperature range | 0 to 40℃ |
| Display | Digital Screen LCD Display |
| Dimension | 195 × 210 × 185 mm |
| Packing dimension | 395 × 195 × 330 mm |
| Power supply | AC 220 V, 50 Hz |
| Net weight | 3.5 kg |
| Gross weight | 4.5 kg |
Electronic Wood Density Meter used for testing the basic density, bulk ,wet, apparent density, apparent porosity, water absorption, volume of open pores and closed pores, total porosity of wood for testing air-dried density of wood, the bulk density also used across wax-sealing method for non-absorbent wood products.
