Air Jacketed CO2 Incubator LAJI-C21 is a cooling and shaking incubator comprising single orbital platform with triple eccentric shaft balance drive, offers 40 to 300 rpm of speed. Adopted with six sides direct heating, auto-adjustable cycle fan speed, door heating system, and compressor this incubator offers continuous operation within 0 to 5999 min and 4 to 65°C of temperature range. Fluorine-free design with 304 stainless steel chamber, shelves, and platform with round curved corners, it is a load bearing structure provide excellent durability and performance. Equipped with IR sensor, color touch screen controller, password lock function, 90° high temperature and sterilization system, it has unique air duct design. With CO2 concentration sensor, advanced alarm system, temperature control and monitoring system, Micro-biological & HEPA filter this incubator ensures controlled, uniform and stable conditions.
| CO<sub>2</sub> range | 0-20% |
|---|---|
| CO<sub>2</sub> recover time | (Return to 5% after opening the door for 30 seconds) ≤3 mins |
| CO<sub>2</sub> control accuracy | ±0.1% |
| CO<sub>2</sub> stability of 5%CO<sub>2</sub> | ±0.1% |
| CO<sub>2</sub> uniformity | ±0.1% |
| CO<sub>2</sub> sensor | IR CO<sub>2</sub> sensor |
| Shaking frequency | 40 to 300 rpm |
| Drive way | Three eccentric shaft balance drive type |
| Humidity control | 50 to 90% RH |
| 37°C humidity control accuracy | 85% to 95% RH |
| Humidity resolution | 0.001 |
| Humidity deviation | ±2% |
| Allowable shaking load | 15 kg |
| Temperature control range | 4 to 65° C |
| Temperature uniformity | ±0.5° C (test point at 37°C) |
| Ambient temperature | 25°C |
| Heating method | 6 side direct heating |
| Sterilization method | 90˚ C moist heat sterilization |
| Timing range | 0 to 5999 min |
| Platform movement | Orbital |
| Platform size (L×B) | 450×450 mm (1pc) |
| Shelf | 3 pcs |
| Display | Colorful touch screen controller |
| Sterilization system | 90° high temp. high humidity sterilization system |
| Filter | Microbiological and HEPA filter |
| Motor | Low heat rejection brushless DC motor |
| Interface | RS485 |
| Alarm system | Temperature deviation, over temperature, high/low speed, door open, high/low CO<sub>2</sub> condensation, disinfection and sterilization reminder, auto cut-off of heat and fan, and auto-stop |
| Orbital diameter | 20 mm+AO2 |
| Interior dimension (W×D×H) | 605×700×520 mm |
| Exterior dimension (W×D×H) | 793×975×853 mm |
| Gross Weight | 98 kg (approx.) |
| Power | 1800 W |
| Voltage | 220V 50Hz |
| Flask Configuration | 50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1 |
Air Jacketed CO2 Incubator are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research and for developing biosensors across medical research, pharmaceutical industry, scientific research, laboratories, etc.
Labtron Air-jacketed Incubators with precise control of temperature and CO<sub>2</sub> provides an exceptionally stable environment. They come with different chamber volumes.
Labtron Air-jacketed Incubators with precise control of temperature and CO<sub>2</sub> provides an exceptionally stable environment. They come with different chamber volumes.
Our superior range of water-jacketed CO<sub>2</sub> incubators is available in different capacities and sizes. These incubators are water-jacketed, made up of corrosion resistant stainless steel and provides protection against over temperature and current leakage.
