Air Jacketed CO 2 Incubator LAJI-C20 is a shaking CO2 incubator with air jacketed configurations suitable for heat/UV sterilization and temperature range of 4˚ to 65˚C with shaking frequency of 40 to 300 rpm. Designed with CO2 concentration sensor, advanced alarm system, temperature control and monitoring system, it provides uniform and stable conditions. Incorporated 90˚ C high temperature sterilization method, touch screen with PID controller, and enhanced safety features provides the benefits of contamination control and uncompromising temperature uniformity for even the most demanding incubations.
| CO<sub>2</sub> range | 0-20% |
|---|---|
| CO<sub>2</sub> recovery time | (Return to 5% after opening the door for 30 seconds) ≤3 mins |
| CO<sub>2</sub> control accuracy | ±0.1% |
| CO<sub>2</sub> stability of 5%CO<sub>2</sub> | ±0.1% |
| CO<sub>2</sub> uniformity | ±0.1% |
| CO<sub>2</sub> sensor | IR CO<sub>2</sub> sensor |
| Shaking frequency | 40-300 rpm |
| Shaking Precision | ±1 rpm |
| Amplitude | 20 mm |
| Drive way | Three eccentric shaft balance drive type |
| Humidity control | 50 to 90% |
| 37C humidity control accuracy | The chamber can reach 85%-95% when 37˚ C , and the humidity can be controlled in real time |
| Humidity resolution | 0.001 |
| Humidity deviation | ±2% |
| Related humidity | Nature vaporate > 95% |
| Allowable shaking load | 10 kg |
| Temperature control range | 4-65° C |
| Temperature control accuracy | ±0.1° C |
| Temperature uniformity | ±0.5° C |
| Temperature sensor | PT 100 |
| Environment temperature detector | Independent |
| Over temperature protection system | Independent |
| Temperature recover time | (Return to 37˚ C after opening the door for 30 sec) ≤8 mins |
| Heating method | 6 side heating |
| Disinfection method | 90˚ C high temp |
| Timing range | 0 to 99 hour 59 min |
| Platform size (L×B) | 350×350 mm |
| Shelf | 1 |
| Display | Digital Color display with touch panel |
| Sterilization system | 90 degree high temp. high humidity sterilization system (RHP); UV sterilization (option) |
| Controller | PID |
| Interface | RS485 |
| Door Open/close message | Yes |
| Alarm system | High and low temperature and over temperature; Chamber sensor failure; Independent temperature limiter; Door open; High/low CO2 condensation; Power off alarm; Door temperature sensor failure; Disinfection and sterilization status reminder; Over temp sensor failure and Abnormal function |
| Interior dimension (W×D×H) | 505×600×420 mm |
| Exterior dimension (W×D×H) | 693×875×753 mm |
| Gross Weight | 91 kg |
| Power | 1500 W |
| Voltage | 220V 50Hz |
| Flask Configuration | 50 ml×36, 100 ml×23, 250 ml×13, 500 ml×8, 1 L×5, 2 L×3, 4 L×1, 5 L×1 |
Air Jacketed CO<sub>2</sub> Incubator are used for tissue engineering, cell culture, in vitro fertilization, diagnostics, neuroscience, cancer research and for developing biosensors across medical research and the pharmaceutical industry.
Labtron Air-jacketed Incubators with precise control of temperature and CO<sub>2</sub> provides an exceptionally stable environment. They come with different chamber volumes.
Our superior range of water-jacketed CO<sub>2</sub> incubators is available in different capacities and sizes. These incubators are water-jacketed, made up of corrosion resistant stainless steel and provides protection against over temperature and current leakage.
Labtron Air-jacketed Incubators with precise control of temperature and CO<sub>2</sub> provides an exceptionally stable environment. They come with different chamber volumes.