LMF-B20 model of Muffle Furnace is a microprocessor controlled furnace with steel sheet housing material and is efficiently designed for minimal space requirement in the laboratory. With heating elements such as Fe-Cr-Al embedded into bricks, K and S type thermocouple and optimum insulation properties, it is ideal for maximum or continuous working temperature of 1100°C. It is accurate in measuring and controlling the temperature and is equipped with instantaneous energy consumption indicator, calculator for average working temperature and descriptive error indicator.
Max. Temperature | 1100 °C |
Capacity | 7 L |
Heating Program | 2 step |
Thermal Rate | 3 °C - 20 °C |
Heating element | Fe-Cr-Al |
Program Memories | 2 |
Thermocouple Type | K Type |
Heating Element Placement | Embedded into brick walls |
Inner Insulation Material | Insulating Fire Brick |
Front Face Insulation Material | Insulating Fire Brick |
Door Insulation Material | Ceramic Fibre Board |
Housing Material | Steel Sheet |
Housing Coating | Epoxy powder coating |
Chimney | Standard |
Element Heating Element Protection | Quartz Tube |
Lockable Door Handle | Sidewards |
Temperature Control Accuracy | ± 1 °C (can vary at low temperatures) |
Measurement Accuracy | ± 1 °C |
Inner Volume Temperature Homogenity | ± 10 °C |
Max. Current | 11A |
Power | 2.600 W |
Inner Chamber Dimension (W x H x D) | 180 x 160 x 260 mm |
Product Outer Dimension (W x H x D) | 476 x 628 x 655 mm |
Gross Dimension (W x H x D) | 536 x 815 x 688 mm |
Net Weight | 48 kg |
Gross weight | 63 kg |
- PID controller
-
LCD display that shows current and target temperature
-
Optimum insulation properties
-
2, 4, 8 and 16 step heating programs available
-
Fe-Cr-Al heating element embedded in brick walls
-
Accurate measurement and control of temperature using K and S type thermocouple
-
Second thermocouple for different adjustable purposes
-
Durable inside lining made of light insulating bricks
-
Dual shell housing for low outer surface temperature
-
Steel sheet housing material
-
Insulating fire brick as inner and front face insulation material
-
Ceramic fibre board as door insulation material
-
Quartz tube used to protect heating element
-
Provision of audio warning as the step changes and at the end of the program
-
Provision of automatic power cut-off to the heating elements and alert if the control unit/control card is over heated
-
Instantaneous energy consumption indicator
-
Calculator for average working temperature
-
Descriptive error indicator
-
User friendly menu
Sr. No. | Accessory |
1 | High Temperature Gloves |
2 | Tongs |
3 | Alumina Crucibles |
4 | Metal Crucibles |
5 | Alumina Combustion Boats |
6 | Ceramic pipes |
7 | Extra Thermocouples |
Over Temperature Limiter
Lift-up Door
Stainless Steel body
Gas Supply Connection
Open Door Sensor
Second Thermocouple
Observation Hole
PC Connection
110 V Power Supply
Inner Module: Changing inner module renews your furnace close to a brand new furnace
Door Insulation: With sheet metal holder vessel
Control Card: Easy-to-replace, pre-programmed
Power Card: Easy-to-replace
Display: 4 x 20 LCD display
Cooling Fan: 80 x 80 x 20 / 220 V fan
Chimney Fan: 40 x 40 x 10 / 5V fan